american harvest 6500 mf stove
- Thread starter vgdieter
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
Not sure what "mf" stands for but here is a manual link without the "mf" if your looking for that. Also not sure what you mean by programming/reprogramming.
http://www.usstove.com/resources/OwnersManuals/English Owners Manuals/6500.pdf.
http://www.usstove.com/resources/OwnersManuals/English Owners Manuals/6500.pdf.
Rubicon 327
Member
i have owners manual thanks, but what i'm looking for is this computer reprogramming codes that run the stove in auto mode. right now if and/or when the firebox gets too hot the auger delay kicks in, which is good, both room air fans should operate when this occurs. only 1 operates on my stove. both fans should run also when stove is shutting down for cleaning , at least till firebox temp reaches a certain level, my stove shuts 1 fan down as soon as i hit the off button. something is not set right in the programming.
[
Rubicon I was wondering were you found that. I have a 6100 model and some of the things in there do not match up with my model. I'm trying to get the air that hose though my ducts to be warmer
Rubicon I was wondering were you found that. I have a 6100 model and some of the things in there do not match up with my model. I'm trying to get the air that hose though my ducts to be warmer
Rubicon 327
Member
I believe I got that info from the "I Burn Corn" web site a few years back. That site is down for repairs I believe I read somewhere on here. A few people on here are missing them and have been wondering what was up with them as well.
It sounds like you are looking to increase your duct temp which I can only guess will come from increasing your pellet feed rate so long as you have everything else adjusted and running well.
Hopefully when they are back up and running you can get the answers you seek.
Good Luck,
Dave
It sounds like you are looking to increase your duct temp which I can only guess will come from increasing your pellet feed rate so long as you have everything else adjusted and running well.
Hopefully when they are back up and running you can get the answers you seek.
Good Luck,
Dave
- Status