- Jan 30, 2013
- 38
I have a pellet furnace that typically runs well but for some reason the fan for combustion turn of and then the furnace has a lazy flame. It kicks back on after a while but I don't get why it doesn't keep running
Fahrenheit pellet furnace
- Thread starter Earl Beach
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
Lake Girl
Moderator
Combustion or convection fan? Stove should be shutting down if the combustion fan stops running. When was the last time the internal exhaust and combustion fan blades were cleaned? Most stoves require new gaskets when you pull the combustion blower so get one in advance...
Pellet-King
Minister of Fire
tstat should have pellets stop dropping then the flame goes out then after it cools the fan should stop, sounds like a limit switch issue
- Jan 30, 2013
- 38
I took the fan out yesterday and cleaned the fan well and replaced the gaskets. Still has the issue.
Jay Z
Member
I would contact the tech support at your manufacture. They have a link on their website for email. I have used it a few times as I just installed my Endurance 50 this winter. They are great in getting back to you.
- Jan 30, 2013
- 38
Thank you for the info.
I have been working with Matt over at the Manufacturer and he has been very responsive.
Seems I have a few items to replace on my stove
I have been working with Matt over at the Manufacturer and he has been very responsive.
Seems I have a few items to replace on my stove
- Status
Similar threads
