CL Laugh of the Day-The Gear

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
smokedragon said:
Some of the Stihls are starting to come out with primer bulbs. Never did like them.
Click to expand...
Me either. Another fuel line and added bulb to go bad and leak.
 
machita chain saw - $50 (white bluff)
machita chainsaw with 16 inch bar in good running shape 50$

machita.jpg


I’d like me one of dem Machitas. Even if this is a DCS3416 - seems like a great deal. Why don’t people put model # on CL????? This is west of Nashville for anybody in the area. http://nashville.craigslist.org/tls/4404390428.html
 
dougand3 said:
Why don’t people put model # on CL?????
Click to expand...

Same people who sell a car on craigslist with no mention of the miles or what engine or transmission it has.
 
Log Splitter - $500 (Somerville)
Log splitter - have split 18 in. hardwood.

logsplitter.jpg


That wedge has some length to it!
 
Looks like it would be really high in horizontal mode.
 
D8Chumley said:
I think that chain might need to be in a different position for that statement to be true
Click to expand...
Makes me wonder if they are selling it because they don't know how to tension the chain (and that caused it to jump ship).........
 
http://chattanooga.craigslist.org/for/4481891396.html
husqvarna 3120 chainsaw 199 cc this is their biggest saw. has a 36 inch bar. $1000. has about 10 hours on it.
  • do NOT contact me with unsolicited services or offers
husky3120xp.jpg

199cc??? I bet that is the biggest. So, you're holding a 6hp lawn mower engine. (It should be 119cc.)
 
  • Like
Reactions: D8Chumley
I have one of the P3314s Paid about $70 refurb. Worked OK for a couple times then i went to use it and found the gas line and primer diaphragm had disintegrated. I only use electric saws now. They start easier.
 
dougand3 said:
machita chain saw - $50 (white bluff)
machita chainsaw with 16 inch bar in good running shape 50$

View attachment 131091


I’d like me one of dem Machitas. Even if this is a DCS3416 - seems like a great deal. Why don’t people put model # on CL????? This is west of Nashville for anybody in the area. http://nashville.craigslist.org/tls/4404390428.html
Click to expand...


Not sure but this saw looks like a Makita DCS 390 or a DCS 401. I have two 401 and it is a fantastic light weight saw. One of my favorites--it even has "Needle Bearings" on the crank, like my Stihl 200t!
 
If you've been lusting after an Eager Beaver and don't mind a broken chain brake, here's your chance!

Posted: an hour ago

chainsaw - $250 (painesville)
00z0z_kKh3LyA6Q25_600x450.jpg



all it needs is all the gasket for it.. Its run good.. it comes with all you see in the pic.. Thanks for looking at it.. I am saling it as is..
 
  • Like
Reactions: D8Chumley
$250 for an Eager Beaver!!! They are $70 around here, if in good shape.
 
bedchainsaw.jpg

$1000, huh? I wonder if these are more expensive if sawed with a Stihl versus a Poulan? LOL
 
  • Like
Reactions: D8Chumley
That saw has to be close by me, as that sticker is from the saw shop I deal with. All for the low low price of $195 too haha! I 'd hope the case is included, along with the months of chips probably packed in the sprocket cover its a win-win!
 
Sooooo, they bought the Stihl at Home Depot???
And want more than a dealer would.

stihl251c.JPG
 
You must log in or register to reply here.

Similar threads

dougand3
  • Locked
Anyone ever use a Homelite 150?
Replies
5
Views
1K
The Gear
tom dee
tom dee
Boog
  • Locked
Adjusting points on a Stihl 031 AV (needed a 3 lb sledge to get the crank out)
Replies
8
Views
16K
The Gear
Boog
Boog
webfish
  • Locked
General GLOSSARY OF COMMON HEARTH AND HEATING TERMS
Replies
0
Views
7K
Articles
webfish
webfish
Boog
  • Locked
191T Engine rebuild, muffler mod, “H” screw mod, oil pump
Replies
5
Views
3K
The Gear
MasterMech
M
jlove1974
  • Locked
Northstar by Northern Tool and other thoughts.
Replies
19
Views
7K
The Gear
Splitter77
S
Top Bottom
Back