breckwell big e control board repair

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
huggmeister

huggmeister

Member
Apr 23, 2014
36
Western NY
Hi guys,
I have a big E I was just going to sell to a guy until I noticed the Breckwell "ghost in the machine" auto starts were happening and the combustion blower wont shut off. I cant sell this to anyone in good faith until I get it right. Does anyone know which circuit board parts have to be changed to get this going again? I read somewhere something about triacs that could be replaced possibly.

Thanks for any advice, Tim
 
huggmeister said:
Hi guys,
I have a big E I was just going to sell to a guy until I noticed the Breckwell "ghost in the machine" auto starts were happening and the combustion blower wont shut off. I cant sell this to anyone in good faith until I get it right. Does anyone know which circuit board parts have to be changed to get this going again? I read somewhere something about triacs that could be replaced possibly.

Thanks for any advice, Tim
Click to expand...
I would send the board out for repair before I spent $300+ for a new board.
Good luck with it.
John http://www.ebay.com/itm/Pellet-Stov...103?pt=LH_DefaultDomain_0&hash=item2c6c884d8f
 
Hi John,
Any experience with this guy and is he reasonable?

Thanks, Tim
 
I have a '94 Breckwell P24I that has an analog control board.

When the board went bad I sent it to David and was satisfied with his work.
Quick turnaround. Send him an e-mail and see if he can help you.

Control Board Repair

David Boyce
[email protected]

[email protected]

Skype: pcbrepairs

YouTube:
 
It probably just needs new electrolytic capacitors,but if you have never done board work reccomend send it out.Never heard anything bad from these guys mentioned above,and Joe in calif.(pelletstoverepair.com) is excellent.
 
Status
Not open for further replies.

Similar threads

C
Breckwell Big E Loose Door
Replies
4
Views
504
The Pellet Mill - Pellet and Multifuel Stoves
Caric67
C
P
Breckwell Big E Fan But no Lights
Replies
2
Views
367
The Pellet Mill - Pellet and Multifuel Stoves
zrock
Z
S
Breckwell Big E not feeding enough pellets
Replies
6
Views
1K
The Pellet Mill - Pellet and Multifuel Stoves
zrock
Z
B
Breckwell Big-E thermostat recommendations?
Replies
0
Views
1K
The Pellet Mill - Pellet and Multifuel Stoves
breckwell_big_e
B
C
Breckwell Big E No Power
Replies
6
Views
2K
The Pellet Mill - Pellet and Multifuel Stoves
Dataman
D
Top Bottom
Back