A quick question for you Super 27 owners that have the blower. How much clearance is required in the back with the blower attached? Is the minimum 5" clearance with double wall enough to accommodate the blower also? Thanks in advance!
Super 27 Blower?
- Thread starter MaintenanceMan
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
skinanbones
Feeling the Heat
If memory serves me correct at the 5" clearance the fan doesn't not fit or it rubs at that point. I think we usally set the stove out another 1" or more to give it some wiggle room.
thechimneysweep
Minister of Fire
When attached, the backplate of the blower is flush with the stove's rear heat shield. In other words, if your stove is 5" from the backwall, your blower will be 5" from the backwall.
skinanbones
Feeling the Heat
here's the link to the instructions from P.E. web site. It looks like at 5" it's tight but doable.
http://www.pacificenergy.net/index.php/download_file/view/263/250/
http://www.pacificenergy.net/index.php/download_file/view/263/250/
- Status
Similar threads
