Best chainsaw for 10 cord, $1000 budget. 25" diameter hard wood

Jutt77 said:

I've enjoyed the heck out of my pawnshop Makita 6400>7900 upgrade (OEM P&C, HD air kit) the past few years. I have around $550 in that saw and its been a dream. Starts in 2-3 pulls every time, no issues and never lacks power. Good AV. Easy to work on. Great saw, I will buy a Dolmar 7900 in a heartbeat if I ever have to replace it. I just ordered the 550xp for something smaller and lighter and as a backup for my 7900. The 550xp (or 545) would be a great option too. So would a Makita/Dolmar 6400 or a ms260/026 or a 362 or a ______. Lots of options.

Click to expand...

You’re going to LOVE that 550xp! I’ve yet to get a 79cc p&c on my 6421, but the 550xp is such a dream to run, I don’t grab the Dolmar until I’ve just about run out of bar length on the Husky.

bassJAM said:

You’re going to LOVE that 550xp! I’ve yet to get a 79cc p&c on my 6421, but the 550xp is such a dream to run, I don’t grab the Dolmar until I’ve just about run out of bar length on the Husky.

Click to expand...

You were 100% correct. I received my 550xp on Saturday. Pretty much like new condition from ebay, even the gray paint wasn't yet scratched. At any rate, I promptly gassed and oiled her up and very quickly processed some 3-8 inch diameter black locust limbs and siberian elm I had laying around. All I have to say is WOW. That little saw screams AND I didn't have to adjust the carb for once. The auto tune was a huge selling point because I cut anywhere from 5,300 for metro area city scrounges to 7,000ft were I live up to 10,000 ft. for mountain gathering and not having to adjust the carb each time is brilliant. Lots of power in a 10lb, well handling, auto tuning package.

I run a two saw plan. Husqvarna 346xp with an 18" bar and a 372xp with a 20" & 28" bar. I've decided that if the 372 with the 28" can't handle the job then I'm not interested in it.

Husqvarna 372 x-torq

Many would argue the best was the 372 pre x torque or 372xpw but its no longer made

I have only run on briefly but I think the 046 is the beat saw made. Good power to weight ratio and can pull a 28" bar.

clemsonfor said:

I have only run on briefly but I think the 046 is the beat saw made. Good power to weight ratio and can pull a 28" bar.

Click to expand...

If you meant "best," then you meant "064."

Never run one..but from what I hear I guess your right.

Hear it smokes the 660 and weighs less in smaller chasis. And I have the 650 so I have the same weight but 7cc less than the 660 and a pound or two more than your 064

For that budget and wood, Stihl 441 would be my choice

362 would be good too

I still say MS362. About $800 and you can do plenty with it. Mine will happily pull a full chisel 25" B&C thru anything.

Flatbedford said:

I still say MS362. About $800 and you can do plenty with it. Mine will happily pull a full chisel 25" B&C thru anything.
View attachment 137905

Click to expand...

Without starting a pissing match, I'm going to have to disagree. Bury the nose of that bar into any good hardwood, and a 362 may pull it, but definitely not "happily." If you're running a 25" bar in hardwood, you'd better have 75cc behind it, minimum.

Joful said:

Without starting a pissing match, I'm going to have to disagree. Bury the nose of that bar into any good hardwood, and a 362 may pull it, but definitely not "happily." If you're running a 25" bar in hardwood, you'd better have 75cc behind it, minimum.

Click to expand...

Unless thats full skip you sure can slow that saw down or have to go real sloe with a 25" bar.

clemsonfor said:

Unless thats full skip you sure can slow that saw down or have to go real sloe with a 25" bar.

Click to expand...

I started with skip and changed to full. I felt like it was doing fine.

clemsonfor said:

Many would argue the best was the 372 pre x torque or 372xpw but its no longer made

Click to expand...

I have both. I'll take the xtorq over the old one any day. Way more power, especially down low. You can't believe everything you read on the internet. Put a full chisel chain on a 24" bar and you have a mean cutting machine.

I have a 372x torque. Its a beast of a saw. I run it with a 20". Never run the old.

I am very happy with my Echo CS600P, but they now make a slightly hotter model, the 620P. I wouldn't hesitate to go with that or a Husky 372XP, if you wanted to spend quite a bit more. My Echo CS500 VL is now about 35 years old and still going strong. If I had found a chain brake kit prior to buying the larger saw, I probably wouldn't have the 600P, but I like it a lot, and use them both.

Get yourself a nice 70cc saw

I would normally say Echo, but you said you prefer something that likes to rev high vs something that revs lower... Echos tend to rev a little lower and have a fatter midrange than the other brands instead of the top end.


Since you like the high revs, I say Stihl or Dolmar/ Makita.

I like the combo I have now, a ported and Tilly carbed 390 XP 28" chisel and a 562XP 20" chisel chained not ported yet... And no, I am not married! Lol