Harman Accentra

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

Mongo

Member
Jan 4, 2010
54
How much of a chore is it to replace the ignitor on a Harman Accentra Insert?
Also
Any suggestions on a good place to buy a new ignitor?
Any information would be greatly appreciated.
 
you can google the ignitor by part number - the part number is listed in your manual

My ignitor went after 4-5 years, and I didn't bother replacing it. I find the Accentra is easy to light by hand.

When I dump the pellets into the stove, I leave the last cup or two in the bag I then shake the lot over a bucket to get the fines out. The remaining pellets go into the hopper. The fines I use to help me light the stove.

I take a used dinner napkin ('Dinner' napkins are heavier, better quality. we use them 1-2 times a week, so there is ready supply)
I roll a handful of fines into it (like a cigar)
I fill the burn pot halfway with pellets, then I put in the napking tube (I usually have to bend it in half to get it to fit)
I put another pinch of fines on top of this
Then I cover everything except the tip of the napkin with pellets.

Light with match.
Usually only takes 1 match to get it going. - the fire eats its way down the napkin and under the pellets, where it slowly spreads to the fines & rest of the paper. After a couple of minutes of smoldering, it will ignite.
 
  • Like
Reactions: Peterfield
I'm not sure he wants to manually light his stove he asked where he could get a new igniter and how to install
 
Stove parts unlimited good call,good to deal with.Will have to get to back of unit for wire connections.Not really a big deal,but I am a mechanic.
 
Status
Not open for further replies.