M55 FS magnehelic location

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
johnnh

johnnh

Member
May 3, 2014
47
seacoast-nh
All,
A friend of mine here at work just bought an Enviro M55 FS. Do any of you know EXACTLY where the hole is located for the magnehelic gauge measurement? Thanks for your help,
John
 
My insert has a bolt just above the upper right corner of the door, need to open the decorative cast door to see it
 
On the freestanding steel M55, while facing the door, the hole is located on the right side panel near the top of the ash pan and the firebox door.
 
johnnh said:
All,
A friend of mine here at work just bought an Enviro M55 FS. Do any of you know EXACTLY where the hole is located for the magnehelic gauge measurement? Thanks for your help,
John
Click to expand...
facing the stove mine is on the left side. So check the left side too if you do not see ant hole on the right.
 
Status
Not open for further replies.

Similar threads

T
Enviro M55 Thermostat Causes #4 Error
Replies
5
Views
204
The Pellet Mill - Pellet and Multifuel Stoves
DevinM88
DevinM88
E
VistaFlame VF55 Igniter Burnout
Replies
3
Views
705
The Pellet Mill - Pellet and Multifuel Stoves
johneh
johneh
A
Enviro Empress FS Smoke Smell
Replies
2
Views
680
The Pellet Mill - Pellet and Multifuel Stoves
johneh
johneh
B
Air Circulating Fan
Replies
23
Views
993
The Pellet Mill - Pellet and Multifuel Stoves
bigealta
bigealta
M
M55 error 2
Replies
6
Views
1K
The Pellet Mill - Pellet and Multifuel Stoves
bostonfan49
bostonfan49
Top Bottom
Back