Hi all,
I have been viewing these threads for a few years and I really appreciate all the info I have been able to find. Thank You.
I recently installed a Englander 25-pdv and used the recommended duravent kit with additional 45 piece for corner install. That was the only way to achieve the required window clearances. I used high temp sealent on the seams and everything is level and I thought tight until I fired it for the first time (for me, it is a used stove) and i could smell fumes, not smoke fumes, but chemical like paint from a new wood stove. There is light smoke coming from pipe somewhere.
Should I run it and watch it or reinstall?
So the set up is back of stove - adapter - 45 - 12" - t - 5' vert - cap
Other than that, everything is working great.
Thanks in advance for any advice!
I have been viewing these threads for a few years and I really appreciate all the info I have been able to find. Thank You.
I recently installed a Englander 25-pdv and used the recommended duravent kit with additional 45 piece for corner install. That was the only way to achieve the required window clearances. I used high temp sealent on the seams and everything is level and I thought tight until I fired it for the first time (for me, it is a used stove) and i could smell fumes, not smoke fumes, but chemical like paint from a new wood stove. There is light smoke coming from pipe somewhere.
Should I run it and watch it or reinstall?
So the set up is back of stove - adapter - 45 - 12" - t - 5' vert - cap
Other than that, everything is working great.
Thanks in advance for any advice!
