New pellet stove owner having a hard time getting a steady heat output from my vistaflame 170. Added a fresh air intake. Using maine wood pellets and Corinth. Barely hitting 70 when standing five feet away with the stove set on 5. Any help would great.
Vf170 with low heat output
- Thread starter Danp76
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
oliveone
Burning Hunk
I have the Enviro Maxx same stove as yours. 5 on my stove would heat the house to 85 degrees in no time at all, stove would be over 380 degrees. There is something wrong. How long did you let it run? On number 5 I could set a rack of wet close 7 feet away an it you be mostly dry in about 1.5 hours. Is the draft set most of the way in? How big is your House?
The house is 2000 square feet. The stove is in the basement. The draft is set most of the way in. I've called the install people to come and look at it . Of course they can't get here to dec 10. I had running for 3 days straight
oliveone
Burning Hunk
Is the stove on a thermostat? Try to run in manual mode. Three days on number five did you use more then 2 bags a day? On number 5 fire box should be full of flames.
Danp76 PM a phone number will try to call you an see if we can get this fixed.
Danp76 PM a phone number will try to call you an see if we can get this fixed.
Will do we will be out of town till Monday. I was looking at the stove at its not level at all..With the front part slopping down off my slab. Wondering if that might have effect. Need to raise the front 1/2 inch to be level with back.
oliveone
Burning Hunk
I have a vista flame vf 55 and had similar issues when I first got the stove. On some VF stoves there is an adjustment plate over the feed auger inside the pellet hopper. you may need to slide this up to reveal more of the pellet feed auger to allow more pellets into the stove. Can't say I'm very impressed with the VF-55 although others seem to love their stoves.
- Status
Similar threads
