Okay. I didnt try to remove and reinstall it, but I did apply light pressure to it and it didn't move. I'll call tomorrow, if I don'tspeak to you, will another sales rep know what i'm talking about?
25 pdvc questions
- Thread starter Jason Knapp
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Chrisnow86
Minister of Fire
Good tip on calling englander. Call at 8 on the dot in the am so your not on hold for 45 min... And all the guys down at ESW are good They will walk you threw everything. It's a good group of guys down there
CladMaster
Minister of Fire
stoveguy2esw
Minister of Fire
if they dont they will ask me i assume, just let them know you have been communicating with me
Ssyko
Minister of Fire
Not to bump an oold thread but if anyone runs into this same problem and needs the prom chip this is Englanders part# PU-C-B-C and they are reasonably priced.
Similar threads
