i have a hearthstone heritage middle of my house go into a feildstone chiminey 4 inch liner 22 ft how would I install one and how far of a run can I do with the flex pipe it would be about 16 foot with 3 90 is that to much of a run thanks
Installing oak
- Thread starter reeltime
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
Peterfield
Minister of Fire
You could run your OAK into the same chimney as the liner and then drill some holes through the side of the chimney above the roof. You then would only need enough flex to reach inside the chimney a couple of inches. My chimney is on the outside and I just drilled a bunch of holes into the clean out door.
Clean out in the basement it's about 1 foot thick stones lots of hammer drilling but an option thanks
Skier76
Minister of Fire
I saw this posted here awhile back. Looks like a good option for inserts that are vented using an existing chimney: http://www.duravent.com/docs/product/PVP_PrairieCap and Increaser_W.pdf
I might go this route down the road. I'd like some more detailed information first; how it's hooked up ect.
I might go this route down the road. I'd like some more detailed information first; how it's hooked up ect.
- Status
Similar threads
