Newbie looking for a wood burning insert...but not black

Welcome to hearth.com, It's nice to have another Milwaukeeish member on the board.

I know it's black, but have you looked at the Hearthstone Clydsdale? It does have a more contemporary look than many inserts.

Fire places are easier in planning at least you know where you are going to put the wood burner, the surround is fire proof and there may be some floor production. You can install these things just pull a permit, read the instructions for the stove and liner you choose then follow them. The Hearthstone Clydesdale fireplace insert comes in Blue/Black Satin Enamel finish. http://www.hearthstonestoves.com/wood_stoves/clydesdale/


Think about if you want a fan running with a power cord to get heat out of a insert. If not just get a wood-stove and put it in fount of the fire box, some will fit into the box. The Hearthstone Homestead Hearthmount - Model #8570H in brown, blue black or sea-foam enamel finish is one. http://www.hearthstonestoves.com/wood_stoves/homestead/

This is what I did to my fire place.
https://www.hearth.com/econtent/index.php/forums/viewthread/3106/

Welcome WOW,

I have a Lopi Declaration, but unlike you went with the all black design, well that was the Mrs. choice. The flush design is what made it stand out and the btu capacity and burn time did not hurt either. Maximum protrusion into the room or on the hearth is 1.5".

I did the complete installation myself, Liner, Cap, Stove, and hearth extension to meet local code and Lopi recomendations.

I only have 1 1/2 cons on the stove, mainly due to the configuration of my fireplace.
- 1 It is too low to the floor because my heart is flat with the floor, I have to sit on the floor to load.
- 1/2 The wood cannot be more than 7" wide (but this is my issue as I had split some too be too big.

I have many pros: I cannot say enough on how it works, construction and appearance.

The stove works great, alot of heat, and the fan even on high is not to loud.

A little about my house: I have a 2700 sq.ft. 2 story colonial with a center stairway. The main floor I usually keep between 72 and 74. I use fans to move the air around and to try to get the heat upstairs. (Still trying to find the fan position that works the best) The 2nd floor is usually around 65, which I find great for sleeping, but a little cool when coming out of a shower, so I use the furnace to bump up that temperature when showers are expected.

Erik

Look at the Morso insert. While still black, it's a very contemporary look. Also, doesn't Hampton come in a color?

Wow,

The roughly 7" is the width, I have had to do additional splitting on a few pieces to get them to fit. They say it can take up to 24" but I have most of my lenghts in the 18"-20" realm.

My insert cost 2600, bought it at the end of the season last year when the dealer wanter to get rid of it to make way for grills.

All in all my total installation ran about 3500, included Insert, Flexible Liner, Hearth extension and Chimney cleaning supplies.


Erik

I wanted a stove that was not black, and installed a Jotul Kennebec, in "Jotul Iron" color. My home is very contemporary, and the stove fit well. That said, you can also consider Morso, and Jotul has bought Scan I believe, also contemporary designed stoves.

-- Mike

wowchad said:

Is that your dream boat, or is that actually YOUR boat? If that's yours you are a very blessed guy! It's a little different than the speedboats I'm into but never-the-less that's one sweet ride!

Click to expand...

She's mine, I own her. And thanks for the compliments... she moves pretty well.

Actually, I am looking at some other boats in the next year, particularly this one. It depends on how well the class racing is. I am very involved in one design racing, so I'm not going to invest in a class that is a flash in the pan. J/120s have a strong class organization, and we race all over the country. Plus, a Club Swan 42 is a big nut to crack open, and the annual budget to keep the program up would be significant.

-- Mike

wowchad said:

eba1225 said:

I did the complete installation myself, Liner, Cap, Stove, and hearth extension to meet local code and Lopi recomendations.

I only have 1 1/2 cons on the stove, mainly due to the configuration of my fireplace.
- 1 It is too low to the floor because my heart is flat with the floor, I have to sit on the floor to load.
- 1/2 The wood cannot be more than 7" wide (but this is my issue as I had split some too be too big.
Erik

Click to expand...

Did you mean 17" or are you saying they can be longer but not more than 7" thick? If that's the case I'd have to re-chop some myself...
I wasn't really planning on installing it myself but I do have some (very little) chimney experience... and I actually do have a account with Copperfield for all the needed supplies and liner kit...still $3300 just for the unit wasn't expected :bug:
I have some double wall rigid that came with a EL FUEGO "insert" I bought but it didn't fit my application, I could probably even use that. Well the rigid vs/ flex is another topic I need to research more.
I sure do wish LOPI offered different surround options!

Click to expand...

if you have an account with Copperfields then check out the Napolean with the colored cast iron surounf and the price can't be beat

Exactly customize the 1402 Napolean. You are not going to beat the price quote anywhere else and they happen to be decent quality stoves.

I believe the shipping is only $100 for you total purchase still can't beat the price because dealers will include the $100