5660 question

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
Gavin641774

Gavin641774

Member
Dec 4, 2014
55
Iowa
You guys with the 5660 US pellet stoves how high does your flame get?is it so high that it touches the heat exchangers or not?just wondering what other 5660 burn like mine since day one has hallways had a high flame no matter how much you adjust the air intake.
 
Heat setting one --- Never gets that high
Heat setting two --- Never gets that high
Heat setting three --- Can get that high sometimes, depends on the pellets that I put in it.
Heat setting four --- Gets that high, kisses the lower tubes
Heat setting five --- Kisses all the heat tubes -- Kicks out some heat too !

And the damper is set at 1 third open for all heat settings, burns pellets up too fast if opened more than this.
Flame is bright yellow / white with a blue base. The blue part of the flame is less that 1 quarter of an inch in height. No black tips at the top of the flame and no black smoke.

Inside of stove is white and not black.

Hope that this helps you.
 
Last edited:
My damper is wide open. My flame has at times hit the top rolled over foward and licked the glass. Not long though. It has something to do with pellet size and feed rate that cant be adjusted on the new 5660
 
I've not seen that here with mine yet with the flame licking the glass.

Yes, the new control board is very basic - so basic that it's fool proof. I have yet to find out if there is any features (test / settings features) on this board, still playing with different button options to see if there are hidden features.
 
Did you come across the revised owners manual? If not I have a pdf I can send you. I know alot of this years 5660l s came with last years manual.
 
Im an hvac guy so having an abundance of air on my appliances that make heat stems back from the nightmare oil fired systems that where under aired and oil soaked. Ive yet to have a hiccup yet but if I have to cut back the air some with diffrent pellets its no big deal
 
CladMaster said:
Heat setting one --- Never gets that high
Heat setting two --- Never gets that high
Heat setting three --- Can get that high sometimes, depends on the pellets that I put in it.
Heat Setting four --- Gets that high, kisses the lower tubes
Heat setting five --- Kisses all the heat tubes -- Kicks out some heat too !

And the damper is set at 1 third open for all heat settings, burns pellets up too fast if opened more than this.
Flame is bright yellow / white with a blue base. The blue part of the flame is less that 1 quarter of an inch in height. No black tips at the top of the flame and no black smoke.

Inside of stove is white and not black.

Hope that this helps you.
Click to expand...

I have about the same results as CladMaster. Hey Clad, if you could send a pdf copy of the new manual to me, I would gladly appreciate it.
 
CladMaster said:
Yes, I have the new manual, it was sent via email to me from US Stoves.
Click to expand...

You probably got it because you sent back registration card that came with stove. Hoping I have no problems with mine because I didn't send mine in. It said right on card it had to be sent back within 30 days of purchase. I bought mine during labor day sale at TSC, which started in august, right before labor day. I never unpackaged my stove till end of October, to install, so I didn't bother to send it in, I figured I was already late and they would not except it. So hopefully NO ISSUES arrive.
 
Law says you just need the receipt. No requirement to register a receipt for anything.
 
  • Like
Reactions: LordmetalZ28
titanracer said:
I have about the same results as CladMaster. Hey Clad, if you could send a pdf copy of the new manual to me, I would gladly appreciate it.
Click to expand...

Take your pick .....

One is from TSC

and the other from US Stove.
 

Attachments

  • 1051805_Man1.pdf
    2.8 MB · Views: 241
  • 5660 new board.pdf
    1.6 MB · Views: 486
My flame results match Clad's exactly, no reason to re-type it here. I did yesterday post about performance in < 20 degree weather. I think it might be worth the read through if you have a 5660 as I do.
 
Thanks guys,I purchased mine December of 2013 at TSC for 719.00 and since then I replaced the room blower,control board and now this week a new burnpot is being sent because the other one warped right below where the chute is for the pellets to drop out
 
titanracer said:
You probably got it because you sent back registration card that came with stove. Hoping I have no problems with mine because I didn't send mine in. It said right on card it had to be sent back within 30 days of purchase. I bought mine during labor day sale at TSC, which started in august, right before labor day. I never unpackaged my stove till end of October, to install, so I didn't bother to send it in, I figured I was already late and they would not except it. So hopefully NO ISSUES arrive.
Click to expand...
No issues send it in with the receipt you will be ok
 
Status
Not open for further replies.

Similar threads

R
Ashley 5660 Auger remove/replace
Replies
1
Views
249
The Pellet Mill - Pellet and Multifuel Stoves
rgray107918
R
W
why is my burnpot filling up with this type of ash?
Replies
13
Views
884
The Pellet Mill - Pellet and Multifuel Stoves
wally1234
W
K
Quad Sante Fe insert small fire on low setting sometime smelling sm
Replies
4
Views
414
The Pellet Mill - Pellet and Multifuel Stoves
johneh
johneh
T
Breckwell p24fsa not blowing hot air
Replies
13
Views
665
The Pellet Mill - Pellet and Multifuel Stoves
johneh
johneh
C
Help with Harman PB105
Replies
8
Views
750
The Pellet Mill - Pellet and Multifuel Stoves
Mr._Graybeard
Mr._Graybeard
Top Bottom
Back