any ideas? Ecotek exchange
- Thread starter jbe01l
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
Unscrew the broken end, off the rod, and using some stainless washers and nut (metric threads), re-attach the rod to the scraper bar.
Bioburner
Moderator
Bioburner
Moderator
There is no room behind the scraper bar? Doesn't the L shape of the scraper give some room, where the original fastener was?
By the way...what are you burning...your firex walls look super dirty!! Maybe your stove (inside the firebox, AND the smoke passages inside the stove) and flue needs a thorough cleaning. Do you know how to take the cabinet side panels off, so that you can get to the clean-out hatches on the backside of the stove?
By the way...what are you burning...your firex walls look super dirty!! Maybe your stove (inside the firebox, AND the smoke passages inside the stove) and flue needs a thorough cleaning. Do you know how to take the cabinet side panels off, so that you can get to the clean-out hatches on the backside of the stove?
- Status
Similar threads
