The past 3-4 start-ups the auto igniter failed to work. Manual start works fine. What trouble shooting steps should I follow to diagnose the problem?
Igniter not working Englander 25-PDVC/55
- Thread starter Ed Churilla
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
flybmw02
Member
Most likely need a new igniter this one works well http://www.ebay.com/itm/381022932181?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
Looking for some way to test this one--maybe it's an adjustment or in need of a good cleaning?
That is a good price for an igniter--are you sure it's compatable to my stove?
h2ochild
Member
Looking at the hole where it meets the front of the stove, does it glow when started? Has to be pretty dark to see that. Or put a Q-tip in the hole for a minute or so..It should light....... If it's not glowing: Is it dirty with ash? Clean it out (gently) with a small screwdriver or Q-tip. You can test the igniter itself( unplug the stove) with an ohm meter, IFIRC it should read 45-50 ohms..
- Status
Similar threads
