Gasifier reviews

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
P

plowboy1

New Member
Feb 2, 2015
3
Cheshire, ma.
Hello all, I've been burning wood for over 30 years, just a good woodstove, nothing fancy. Now, with retirement in site (picture a smiley face here), I'm thinking of upgrading to a gasifying indoor boiler. Yes, I know, should have done it 20 years ago. Oh well.
I have been looking for sometime and am very disappointed that there is not a simple(to understand) list of manufacturers and reviews. I want to know what REAL users have to say.. Quality and reliability, ease of operation , maintenance and repair(quality?), cost and customer support.
We all know how hard it is to get honest appraisals and that sometimes these thing are manipulated. So what's there to do?
It could be that I'm missing the boat. Computers and TVs are still a mystery to me. If someone can point an old guy to the right place, it would be greatly appreciated.
 
Plowboy, you might take a look at Woodnotoil's site, http://www.woodnotoil.com/. He used to provide info on wood gasifier manufacturers and models. I haven't looked at his site in quite a while but you may be able to gather some info there.

Mike
 
Welcome. You have come to the right forum for honest information. It is a big decision and there are many options which is a good thing. I would start by doing a search on this site of the more common gasification boilers: EKO, Tarm, Froling, Econoburn, Garn, etc. If you have the space and money, I personally see the Garn as the best - all things considered. I have an EKO which I'm satisfied with. Well seasoned wood is necessary in gasifiers. You could spend from $5000 to $20,000 plus on boiler and setup. Good luck.
 
Whitepine2 said:
http://outdoorwoodfurnaceinfo.com/forum/index.php

Try this cite good info on all types of boilers.I see you are from MA.
and I think you will need to get a Ma.compliant boiler for inside just
make sure before you buy.
Click to expand...

'All types'? That place isn't very useful if looking for info on an indoor boiler.

Best thing I can think to say is just read as much as you can here.

BTW, what is your wood situation/supply like? If I was retiring, I might also consider a pellet boiler. There are some very nice ones out there. In here too.
 
maple1 said:
'All types'? That place isn't very useful if looking for info on an indoor boiler.

Best thing I can think to say is just read as much as you can here.

BTW, what is your wood situation/supply like? If I was retiring, I might also consider a pellet boiler. There are some very nice ones out there. In here too.
Click to expand...

That's a good point or for simplicity and less cost: a pellet stove. My Parents installed a pellet insert in their basement this winter. Firewood got to be a bit too much for my Father. He cut/split & burned until he was 70. He's happy with the insert.
 
Don't know how old you are but I have seen some nice pellet boilers for inside
heat installed in MA homes. It took me four months of checking out boilers
and bought a P&M outside boiler four years ago and love it. If and when I
do it again would look into auto feed pellet boiler as I;m only 71 and seems to me a better way to go take your time and look and talk to people that have them.
 
Whitepine2 said:
Don't know how old you are but I have seen some nice pellet boilers for inside
heat installed in MA homes. It took me four months of checking out boilers
and bought a P&M outside boiler four years ago and love it. If and when I
do it again would look into auto feed pellet boiler as I;m only 71 and seems to me a better way to go take your time and look and talk to people that have them.
Click to expand...


Thank you all for the replies! This is great information! (I have used a solar forum where I felt kind of shunned). I'm about 60, and yes, I know the day is coming, but I really like cutting my own wood. We have a little farm here with plenty wood. I personally try to selectively cut the sickly or damaged trees.
I haven't considered the pellet stoves/ furnaces because I don't want to swap my oil man for a pellet man. We have baseboard heat now so to tie in won't be a big deal
A friend has used a gasser for about 30 years and would have nothing else. BUT... he has to replace the ceramic-like chamber every couple of years. They have to be ordered and are expensive. That's one of my concerns.
Thanks again, time to start reading.
 
I can understand wanting to burn wood as long as possible and a gasser is the ideal setup. I hate the oil man also and one concern I have with pellets is the price is market driven.
 
I love my EKO and would recommend it to just about anyone looking for a reliable, affordable, high quality rig. BUT I would personally not consider this to be retirement-worthy.

You can split half as much wood for your gasser vs a conventional boiler but you have to split it half the size. I'm not sure how much time we actually save working the wood pile. The wood pile is much smaller, yes.

I'll echo the above - go pellet and enjoy your retirement not working the wood pile.
 
Last edited:
Too bad they don't make a one that does both cord wood and pellets.
 
The varm units have a Viking pellet burner option. I've been doing a bit of research on some of their units. It's worth looking into, it's always nice to have options.
 
rkusek said:
Too bad they don't make a one that does both cord wood and pellets.
Click to expand...
Effecta also has a similar option to the Varmenbaronen boilers, where you can swing a pellet burner in to the door, and fire it up on pellets. not cheap, but a 30 second change over and off you go. If I had endless resources, and was building again, this is what I'd do. buy the wood burner setup for pellets, and then add on the pellet burner later.
k
 
I think EKO is the cheapest. They are very simple. My only regrets is if I would have spent a lousy extra 500 bucks on a 40 instead of a 25 I could load it 2 times a day instead of 3.
 
  • Like
Reactions: BoiledOver
Hey you could always go with a multi fuel system like the Wood Gun wood/coal burner.
I don't know much about coal, but is there much of a demand for it anymore and is it really market driven.
That said, it may make hard to find.

http://www.alternateheatingsystems.com/multi-fuel.html
 
Status
Not open for further replies.

Similar threads

A
Replacing Brookwood boiler: Gasifier vs a "conventional"?
Replies
12
Views
3K
The Boiler Room - Wood Boilers and Furnaces
aczlan
A
Amin1992
Selling my Stihl MS250, want an MS261 - good idea?
Replies
14
Views
5K
The Gear
dznam
D
A
Heatilator vs ComfortBilt - reliability, performance, and EPA compliant
Replies
8
Views
3K
Heatilator
SidecarFlip
SidecarFlip
G
How do I like my Vermont Castings Dauntless? An early on review.
Replies
78
Views
11K
Vermont Castings
GrumpyDad
G
J
Help me pick out a medium size woodstove.
Replies
17
Views
2K
The Hearth Room - Wood Stoves and Fireplaces
begreen
begreen
Top Bottom
Back