Need Dry Wood Supplier Fingerlakes Region, NY

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

Deadspider187

Member
Jan 30, 2013
11
It's been a crapshoot getting well-seasoned firewood this year. My usual supplier ran out of seasoned hardwood last year and went up in price as well. I found a backup supplier that delivered me two cords in September that was around 30%. Not great, but it did well in a pinch. That wood burned much quicker than I expected given the poor performance of the wood and cold days we've been having here. That supplier also ran out of their dry(er) wood. I managed to line up a third seller from Craigslist that sold me some of the wettest wood I have ever seen (i.e. 35-45% on the meter!!!).

So, I'm just about out of wood currently. I know I'm looking to get 2x-3x the wood this spring/summer so I can start really seasoning the wood correctly, but for this season I'm out of ideas. I've called several people and none of them offer wood that has been cut and split for over a year.

A local energy supplier said they can deliver a pallet of ecobricks for $373/ton. Seems kind of steep to me but I don't know where else to go. I can use some friendly advice at this point.
 
If you have the gear drive around and look for dead and down timber. Try knocking on doors to get permission to help them clean up by hauling away anything over 3 inch diameter. If the dead and down is fairly old you may well find it to be close to ready already, certainly better than 45%.
 
If you have the gear drive around and look for dead and down timber. Try knocking on doors to get permission to help them clean up by hauling away anything over 3 inch diameter. If the dead and down is fairly old you may well find it to be close to ready already, certainly better than 45%.

Thanks for the suggestion. I would need to pick up a splitter though. I have zero experience in splitting my own wood, but I'm open to the idea of it.
 
Status
Not open for further replies.