VC Resolute Acclaim install

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

Plow Boy

Feeling the Heat
Nov 14, 2012
293
Iron Station, NC
Well the guy is coming tomorrow to lay the tile in the family room.
IMG_20150210_184736_hdr.jpg

The wife and I have picked out a nice corner to put it in
IMG_20150210_184621_hdr.jpg

I think we should have a straight shot for stove pipe through the trusses
IMG_20150210_184631_hdr.jpg

I've done some cleaning and a brick repair (hope it holds)
IMG_20150210_192316_hdr.jpgIMG_20150210_192717_hdr.jpg
 
Last edited by a moderator:
What polish would you guys recommend. I need to clean her up on the outside now, she has a little surface rust I need to take care. Any suggestions would be greatly appreciated this is all new territory to me.
 
Are you sure you have enough clearance to those walls it looks tight. But it is hard to tell from a pic
 
Are u talking about my stove that is already installed?
 
Just picture angle. I'm completely legal
IMG_20150210_195808_hdr.jpg
 
Last edited by a moderator:
Are u talking about my stove that is already installed?
Yeah sorry i didnt even look what stove it was i just assumed it was the vc. and they don't have that tight of clearances and yeah that looks much better like i said it is hard to tell from the pics
 
We got the tile laid today. Going to grout Mon.

IMG_20150213_201619_hdr.jpg
 
Last edited by a moderator:
Trim and grouting completed today. Also put recess boxes on receptacles

IMG_20150216_210446_hdr.jpg

Still have to clean it good and seal the tile.
 
Last edited by a moderator:
Status
Not open for further replies.