Englander 30-NC questions

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

synthnut

New Member
Nov 21, 2007
66
NY
I went to the Englander site for measurements, but was not successful

1) How big/deep is the ash drawer on the Englander 30-NC ?

2) There are 6" legs with this stove, and from what I understand , they are now being shipped with 9" legs which changes the measurements given on the site .....

Could someone please give me the measurement of your stove from the floor to the top of your flue thimble ?.....Also I need to know what the measurement is from the bottom of your ash pan to the floor .... and how long are the legs on your stove ?

I need to know these measurements as I will be buying this stove, and will be cutting down the legs to be able to fit the stove in my fireplace .... I was considering the 13- NC but I'm not sure it will produce enough heat for my cabin ....I would rather have too much heat than have too little heat ...Thanks to all in previous discussions on these stoves ... I've learned a lot ...

Thank you ..Jim
 
The owner of Englander is a very regular poster here and can probably answer all your questions, so be patient. From what I have seen in the past he does a great job.

Meanwhile, is there a link within the Englander site that has access to the manuals for the stove(s) you are considering?
 
Well he isnt the owner but rather up the ladder. Either Mike or Corrie will be along with the mos definative answer. They really take care of their customers. Just hang tite
 
I'll let you know on Monday. Weren't you going to send me a diagram that you needed dimensioned, or was that someone else?

Thanks!
 
Corie,
I had sent you a PM telling you that I posted a pic on the thread we were on the other day ....I guess you didn't get it ....Jim
I'll find it again ....Jim
 
Here it is ...
 

Attachments

  • Fireplace 72 dpi.jpg
    Fireplace 72 dpi.jpg
    37.6 KB · Views: 362
I hope this dimensioned drawing is helpful. If you need any other dimensions, please let me know.

Also, the ash pan is 11.25" wide X 12.375" deep X 2.25" tall.
 

Attachments

  • 30NC - Dimensioned Drawing.JPG
    30NC - Dimensioned Drawing.JPG
    33.1 KB · Views: 281
Corie,
YOU DA MAN !!!......Thank you so much !!....This helps me TREMENDOUSLY !!..... I'm sure it will help others also !!....Jim
 
Glad I could help. Again, as I said in the PM, please feel free to contact me if you need any additional measurements or other information.

:)
 
Status
Not open for further replies.