helllloooo to the forum.new here and great info on pellet stoves for a newbie like me.just got a harman xxv in sept. to say good-bye to the oil man.have been testing every type of pellet i can get my hands on here in upstate n.y.i noticed different pellets require to move the feed higher or lower.my question is when i move the feed down from say 4 to 2 i also lose alot of heat output and throws off my variables when comparing pellets.for example with Hamers hot ones i have to turn the feed to below 2 setting or the pellets will be spilling over the edge only half burned.yet okanaga platniums can see a 4 feed setting with no problem
help with feed adj.testing pellets harman xxv
- Thread starter HOGG0494
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
john193
Minister of Fire
Have you read this?
https://www.hearth.com/talk/threads/how-your-harman-works-what-your-manual-doesnt-tell-you.91030/
I too used to think you can test pellets in a harman, but you can't because the output is set by the ESP, not pellet quality. All this and more in that link.
https://www.hearth.com/talk/threads/how-your-harman-works-what-your-manual-doesnt-tell-you.91030/
I too used to think you can test pellets in a harman, but you can't because the output is set by the ESP, not pellet quality. All this and more in that link.
- Status
Similar threads
