Got a good start on 2017 wood

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

Rebelduckman

Minister of Fire
Dec 14, 2013
1,105
Pulaski, Mississippi
image.jpg This is mostly white oak and water oak. Long way to go still but I'll get there. 2016 is taken care of. It's a mix of oak, hickory, cherry, maple and ash
 
Looks good . We are working on 2018 and only need about 1+- more cord of any hard wood to fill the rack. Then will have to build another rack this year for 2019.
 
How sturdy is the wood stacked like that? Could you run into it and not have it fall over?
If the ground is pretty compacted, I'd think that will probably be pretty stable at that height. I wouldn't run into it to test it, though. ;lol
 
  • Like
Reactions: Rebelduckman
Looks good to me. All that dry wood will pay off in the future.
 
Are the landscape timbers that are sat on the cinder blocks attached to them in any way? or are they just sitting their with the wait of the firewood keeping it in place? Looks good. I've been making some bases for my stacks out of 2x4 pressure treated, it works but I like what you're doing here. Quite a bit higher off the ground which will help with airflow. Easier to make yours level too, and cleaner. Looks good.
 
Are the landscape timbers that are sat on the cinder blocks attached to them in any way? or are they just sitting their with the wait of the firewood keeping it in place? Looks good. I've been making some bases for my stacks out of 2x4 pressure treated, it works but I like what you're doing here. Quite a bit higher off the ground which will help with airflow. Easier to make yours level too, and cleaner. Looks good.

All it is is landscape timbers, cinder blocks and 2x4 on the ends, no fasteners.
 
Ok cool, wasn't sure if you used anything to fasten it or if the weight of the wood holds it all in place. Thanks.

I did the whole pallet and bookend thing but this is just easier for me. It seems to be working out pretty well so far. Good thing is everything is treated so it'll last many years I hope
 
Sweet! I've got a bunch of landscape timbers but continue to use pallets for my stacks.
 
I know I sound silly but I worry about a wood pile falling on my little girls. I would like to set up some stacks to divert some snow drifts in the winter....have the wood sit like that for a whole year and then pull it in to burn and put some more wood there--kinda like a snow fence I guess. But I don't want the kids running around it and then have a pile fall on them.
 
I know I sound silly but I worry about a wood pile falling on my little girls. I would like to set up some stacks to divert some snow drifts in the winter....have the wood sit like that for a whole year and then pull it in to burn and put some more wood there--kinda like a snow fence I guess. But I don't want the kids running around it and then have a pile fall on them.

Not silly at all. I have kids too and this has crossed my mind. Honestly they are pretty sturdy with the weight of oak bearing down on them
 
Status
Not open for further replies.