Done with pellets

TimfromMA said:

I have the exact opposite view. The biggest POS on the planet is a tie between Ford and Chevy. Toyota is the best you can buy hands down.

Click to expand...

In a few weeks my '05 Tacoma with over 150,000 mi will be getting a complete new frame compliments of Toyota! I guess they are rusting out prematurely.

Hey now, I have two Chevys, a Ford and a Honda. The Honda I use just to commute to work. It is also the only one I have had to replace a motor and have the tranny rebuilt. My Silverado is an 07 with almost 110K on it. Love that truck.

I was watching the oil prices, they were down to 2.29. My threshold for turning on the furnace as primary was $2.00. I checked every couple of days. When I checked again it was 2.49 for 150gal or more so I ordered it. (I've used 267 galons supplimenting my pellets and hot water) so as of last week it was about $1475 in pellets and $640 for oil. I shutter to think what my oil bill would have been even with the droping prices in the 250yr old uninsulated farm house. When oil is over $3 a gallon I use between $3900 and $4800 depending on how much over it is.....in a normally cold year. These last two seasons it has been colder than normal and I've had pellets.

Today oil is $2.74 here.

Mark_ms said:

My 10 year old Chevy with 250,000 is my daily ride and keeps on ticking

Click to expand...

I just traded in a 12 year old Toyota with over 300k miles only because I wanted something new. It never gave me a day of trouble

I've had a bunch of GM's, all crossed the 150,000 mile mark before they were sold on to other owners and continued in service. The current Impala in my garage has 207,000 on it, and has spent a lot of it's life lugging around my trailer with loads of stuff on it, and hauling 1,000+lbs of newspapers 6 nights a week on my commercial delivery route.

Stove and cars are a lot a like, you can have a Kia go 250,000 miles, and you can have a Mercedes give you trouble right after it rolls off the lot. Likewise, you can have trouble with a high dollar stove, and you can get a lot of mileage out of a low end stove. You get what you pay for to an extent, but there is plenty of variance within that.

Oil is coming back up, I'll be holding on to my pellet stove and it'll always be my primary heat source until it's actually cheaper to burn propane, which I wouldn't expect anytime soon/ever!

Rearscreen said:

In a few weeks my '05 Tacoma with over 150,000 mi will be getting a complete new frame compliments of Toyota! I guess they are rusting out prematurely.

Click to expand...

Very well known issue for about 4-5 years of the model run. Resale prices for the affected years are in the gutter.

Glad to see Toyota is taking care of the problem for you. I didn't have the same luck with making them buy back a 91 Cressida that had paint damage from day one. They verbally promised me a new car and it didn't show up. The Better Business Association arbitrator made them buy it back after me driving it for free for almost a year. Have had a sour taste for Toyota ever since.

Hey Cleet, what dealer? I know the one that I am thinking

....Folks, including Harman owners, will be dumping stoves this year due to low oil and NG prices.

Click to expand...

Probly the same ones that thought there would be a glut of pellets in March....

Those thinking that the oil prices are going to stay low, are dreamin'......

Come on peeps, dump those stoves since we all know oil prices will stay low forever so I can pick up a used one cheap for my lower level.

If your done with pellets what will you use? Heat pump? Wood furnace, oil, nat gas, BB heating?

hyfire said:

If your done with pellets what will you use? Heat pump? Wood furnace, oil, nat gas, BB heating?

Click to expand...

You forgot coal....

Dan

Bill L said:

Harmans are the BEST STOVE EVER!
Seriously though, surprised too see all these troubles. As far as the reviews, I haven't seen many bad ones unless I missed them. Maybe they rolled off the front page with all the people posting problems with their Harmans

Click to expand...

That may hold true today but before Harmons were popular there was Whitfield, mine is still cranking 24/7 6 month's out the year for 17 years now!

Pellet-King said:

That may hold true today but before Harmons were popular there was Whitfield, mine is still cranking 24/7 6 month's out the year for 17 years now!

Click to expand...

Harmons are the Chinese model. Make sure to get the Harman, much better.

Harman stoves are a problem of their own making. They need so little daily,weekly maintenance that owners often neglect them till problems arise. I pushed mine hoping to get to weekend for a full hopper to vent termination cleaning and it started producing heavy soot So at -14 this morning I was powering a brush down the vent and carefully cleaning the ESP.
How many propain furnace owners do a annual furnace cleaning and inspection until "why's it so cold in here?"

Pete Zahria said:

Probly the same ones that thought there would be a glut of pellets in March....

Those thinking that the oil prices are going to stay low, are dreamin'......

Click to expand...

Lemmings will always chase the price so yes, pellet stoves sales will abound this spring/summer. There were just two post for p-series Harman's for $1200 and $1400 respectively, both in NH.

There is a shortage of cheap pellets for sure but a plethora of ads are starting to appear from little capitalists selling Green Supreme's for $7/bag, Energex for $8 /bag, Gold Infernos and Blazers and Firesides for $7/bag, and Okie DF's for $395/ton. Several other brands for around $8/ bag, etc. There are ads in Maine, Mass, NH, and VT. They say their stove broke, they ordered too much, they are moving, they are switching to NG, propane, oil, yada, yada, yada.

On the cheap side, today HD Keene has 44 tons at $4.98 a bag, another has Fireside Ultras, TSC's have Equine pellets for $5/bag, all day long. A little effort goes a long way.

Good ridden. To the M55 that is...

Husky said:

Harmons are the Chinese model. Make sure to get the Harman, much better.

Click to expand...

you got me!!

Peterfield said:

On the cheap side, today HD Keene has 44 tons at $4.98 a bag, another has Fireside Ultras,
TSC's have Equine pellets for $5/bag, all day long. A little effort goes a long way.

Click to expand...

Both HD's, the Lowes, and the TSC are all out here, (horsie stuff too).....
at least early this morning..
Lowes did have 44T it went in a day and a half.....

Different areas have different situations.
Within our state.

Bioburner said:

Harman stoves are a problem of their own making. They need so little daily,weekly maintenance that owners often neglect them till problems arise. I pushed mine hoping to get to weekend for a full hopper to vent termination cleaning and it started producing heavy soot So at -14 this morning I was powering a brush down the vent and carefully cleaning the ESP.
How many propain furnace owners do a annual furnace cleaning and inspection until "why's it so cold in here?"

Click to expand...

i will say burning super premium has made the difference for me. Since ive been burning spruce pointes exclusively this season, I haven't had to touch a thing. I yanked the stove out of the fireplace after burning my first ton, and there was nothing in the liner and the combustion blower barely had a coating of fly ash on it. The stove has been running so hard that it barely leaves
anything behind. All I do is dump the ash pan and clean the glass. that's it.

Bioburner said:

Harman stoves are a problem of their own making. They need so little daily,weekly maintenance that owners often neglect them till problems arise. I pushed mine hoping to get to weekend for a full hopper to vent termination cleaning and it started producing heavy soot So at -14 this morning I was powering a brush down the vent and carefully cleaning the ESP.
How many propain furnace owners do a annual furnace cleaning and inspection until "why's it so cold in here?"

Click to expand...

I did this yesterday, and the renewed and jacked up heat level never ceases to amaze me!

First ton was out the exhaust by end of November. Stove normally gets done every three weeks and the venting if normal weather would have made it till spring easy with a after shoulder season cleaning but who thought we would have snow in every state in the lower 48 this week?