Logburner installation + exposed brick makeover...

Evening Guys, First post

I'm going to be posting a few questions up so thought i'd introduce myself and show you how my first log burner install panned out.

I live in the Northwest UK, plan to use it in the winter months and once i've got a second log store built start stock piling some wood to chop and dry out.

This gas fire came with the house when I bought it 5 years ago, never been keen on it and the missus detested it lol






Opened up to a nice size...


Bricks don't look too good, very loose around the metal lintel...



Bricks reseated and pointed in Lime Mortar..




Great colours



Brick hearth laid down with 1930's common house bricks...

Closure plate


Dried out a lot now, room decorated, but still need to find something to seal the bricks with? (like the wet look for the colours popping out)

Pellet_Pete said:

I guess we can add "closure plate" to the ever-growing list of English language disparities on either side of the pond! I suppose "block-off plate" does sound rather blunt and gritty, rather American.

Excellent work though - that brickwork looks better than original construction!

Click to expand...

The fitter said if it was a wood burner fitted without a fluepipe, just using the natural chimney it would be a registry plate, which completely seals the chimney and room from gasses/smoke etc. When a flue is present to take the gasses/smoke away its a closure plate, simply to close the open chimney off from the room.

mellow said:

Nice job, are you the only one burning wood in your neighborhood?

Click to expand...

Neighbours have had one for around 5 years, and quite a few chimneys in the neighbourhood have anti-down draft anti-bird chimney cowls i've noticed recently. I'd say around 5 houses nearby. The air can smell quite medieval on a cold night outside LOL

Thanks for the comments all too!

FionaD said:

Hi Paul and welcome from a fellow Brit. Love what you've done it looks fantastic. Especially the 'closure plate'! your whole room must feel transformed. Beautiful wee stove. What's the kw output?

Did you put some insulation in the chimney? I think they're pretty keen on people doing tthat these days. I have some vermiculite balls poured in, between the liner and the bricks. Looks like loads of Maltezers.

If your brick work acts anything like my stone wall behind my stove, you'll find you've got a great big new storage heater in your living room as well as a stove!

Click to expand...

Spent a lot of time in the room since its been fitted

Didn't need any insulation down the chimney as neighbours chimney adjoining so no insulation problems, and a very high stack too with good draw. I do use that stuff in the garden though for drainage.

The bricks get lovely and warm on the breast and can feel the heat radiating off.

This is the stove, mix of cast iron and steel apparently, 4.9kw 85% efficient. Not sure how that compares to the rest of the market.

Evening Fiona, at the moment only got one log store and its full so waiting to get another and then I can get free wood from a local tree surgeon to chop up.

Paid £50 for a ton bag of mixed soft and hardwoods. So far seems to be lasting pretty well. (just put a video up https://www.hearth.com/talk/threads/fiskars-x27-super-splitting-axe-mini-review-video.142241/ )

Hi begreen I agree it does sound a very high figure! What sort of efficiency would you expect to get on an average stove nowadays with wood, in real world usage?

Found the breakdown in the manual, so 80% on wood, 85% on solid fuel...