ECO 65 early model igniter upgrade.

Looks absolutely horrible... find me the old one too...

That would be a tough one you would have to put the ignitor in the burn pot from the bottom up and get wires back into the stove.

Love the Heat said:

Actually do you know if the igniter can be remove from the tube as I was thinking of taking
the entire thing out and putting a new igniter in the tube and than putting the whole thing back as in the first picture...

Click to expand...

You probably could not do that the air ignitor is hollow inside with a wire inside.

What you need to do is put a timer on the ignitor so once the stove is lit, it no longer needs to run and waste energy.

What you are looking for is what is known in industry as a "cartridge heater" . You should be able to pull the cartridge heater out of the tube affair and see a number stamped on it, as it is made by someone else-likely Tempco. But in reality, if it is 110 volts and you have an idea of the wattage and dimensions , there are lots of low cost substitutes out there if you start looking under cartridge heaters. Look under ignitor and add 100 percent or more to the price.

All those ignitiors are not hollow inside, we need a hollow one so the air can go through it...

Love the Heat said:

Hummm.OK and I thought it was an ignitor inside the tube and that the air from the pump
was passing between the wal of the tube and the ignitor.....
Once I take it out I'll have a better idea/view.

Thx

Click to expand...

Oh maybe your right I assumed it was hollow, please have better look..Or someone needs to open one up.

They are a sealed stainless tube. I thought it was a wire that was getting red but it isn't. It is the end of the heater tube. So you can poke in there all you want and you won't hurt anything-no open exposed wire. The nichrome wire is wound inside the tube and I believe it is filled with a filler substance to keep it from shorting out.

Here is a link to the eco-65 ignitor the last 2 pics are the old style, which is what we want to use...

http://www.stove-parts-unlimited.com/Caddy-Alterna-Drolet-Eco-65-Igniter-Kit-p/se30789.htm

Here is a link to igniter we need for the older models 44133

http://myfireplaceproducts.com/ProductDetails.aspx?ProdID=44133&Lang=EN

crusher said:

Here is a link to igniter we need for the older models 44133

http://myfireplaceproducts.com/ProductDetails.aspx?ProdID=44133&Lang=EN

Click to expand...

For $155 NO WAY too much money ....