Easy way to remove linoleum?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

Dune

Minister of Fire
Is there a power tool for this?
 
Heat gun and scraper blade?
 
I got lucky mine was laid on 1/4 in ply sub floor
used a square noised shovel and just pried it up
laid a new ply wood floor before laying a floating
tile floor best move I have ever made
 
Rented a linoleum scraper blade for a big Bosch demo hammer.
Fighting me all the way.
 
Glad Mothers Dat is only once a year.
 
You Know It could be worse
Could be ME
 
  • Like
Reactions: Swedishchef
Is there a power tool for this?
Make sure there isn't asbestos in the old linoleum. This could ruin your life.
 
  • Like
Reactions: Swedishchef
Nope.
Put it down myself 20 years ago. Thanks for the safety advice though.
 
I tried dry ice on some linoleum that was put down some time after the house was built in 1920.
I didn't want to make dust and heat made an awful stench.

The sheet and most of the glue popped off in little sections the size of the cake of ice.
It didn't take all the glue though and I had to work at that with a chisel, shaving it off the floor.

I just wanted a flat floor for sheet vinyl. There was no way to restore the hardwood floor as there were repaired damages around the perimeter from leaks and a room expansion.
 
Another 1/4 subfloor on top if it does not look goofy. Did that in my bathroom you would never know by the way it lines up with the other floor.
 
Did you get it all off? Sometimes when we install/build/add to our houses we often forget that sometimes we may need to undo it..lol "yeah, I can add a bit more glue..."

Andrew
 
Another 1/4 subfloor on top if it does not look goofy. Did that in my bathroom you would never know by the way it lines up with the other floor.
Wish I had. I spent a couple days flattening the floor and extra stiffness wouldn't hurt either.
 
Status
Not open for further replies.