using adjustable pipe

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
corkman

corkman

Minister of Fire
Dec 3, 2009
721
SE,Mass
hi all.im in the process of removing my vf55 and installing a p68.i have an 18" adjustable section that needs to slide over a 5ft section of pipe.the overlap is gonna be about 11".im dryfitting all the pipe before the actual
install and cannot for the life of me get anywhere close to the 11" overlap i need.any suggestions on what i can use to lube it up.Peace,Corkman
 
Try using Dish washing soap or any hard soap for that matter
can't see the down side does not burn any that's left can be removed with a cloth and water
 
I had the same issue with my install. I used spray silicone, it worked a treat.
 
Status
Not open for further replies.

Similar threads

K
Vent Pipe Installation
Replies
7
Views
698
The Pellet Mill - Pellet and Multifuel Stoves
SidecarFlip
SidecarFlip
M
Question on stovepipe install regarding maximum distance of a 45 degree angle w/6"single wall durablack pipe
Replies
4
Views
2K
The Hearth Room - Wood Stoves and Fireplaces
mcmars
M
j7art2
Too much draft?
Replies
36
Views
3K
SBI: Century,Drolet,Osburn,Valcourt,Englander
EbS-P
EbS-P
B
Need to Troubleshoot and Repair My Pleasant Hearth problem
Replies
19
Views
4K
Pleasant Hearth
boatboy63
B
F
How deep should this go?
Replies
2
Views
625
The Hearth Room - Wood Stoves and Fireplaces
moresnow
moresnow
Top Bottom
Back