Hello, I was hoping someone could help me troubleshoot my thermostat problem. I have a Lux TX9600TS thermostat hooked up to a Hudson River Davenport insert. This is our third winter with it and it has worked all along. I believe it worked when I first started the stove this season but it's possible I'm misremembering. Basically the thermostat and stove don't seem to be communicating anymore. We have it programmed at either 60 or 70 and the stove stays around 75 the whole time. We used to hear a clicking sound when the programmed time came but don't anymore. It's set to a Hi/Low and I've made sure that's the setting on the stove. Any recommendations I can try? Being home during customer service hours is tough for me.
Thermostat Stopped Working
- Thread starter McGrai37
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
hossthehermit
Minister of Fire
Thanks for the reply. I replaced the batteries to no affect. The display still works and no low battery indicator is flashing.
Bioburner
Moderator
Been a couple cases of the wire to the stove has failed and not allowing the thermostat to communicate with the stove.
- Status
Similar threads
