Modern stove installation, but in a 5 feet basement (ceiling height)...?

We're upgrading the wood stove with something newer and more efficient. We currently rent our place with buying option. It’s a 105 year old house, two storey and not well insulated(but will be in the future).


We know a new chimney was installed 5 years ago. Appears to be 7” with 2” insulation -There’s nearly 4(Edit: not 4 but 2) foot of it inside the house going through the wall. But the stove is very old and unmanageable.


In the basement, there’s 5 feet clearance between the concrete floor and the joist (wood log beams) and almost 6’ between those floors. There’s currently a small (maybe 1/2” thick) sheet above the stove. I guess that act as a heat shield.


We’re thinking about getting the Quadra-Fire Adventure II (Link). But whatever I look at, they all seem to require at least 48” clearance between the top of the stove and the ceiling. Which isn’t possible in my situation.


Should I be worried? Or is this normal and a none-issue?

Edit::album

I've added some pictures to my original post. Not sure if you can get anything out of them... (album)

jatoxico said:

You most definitely should honor all clearances. That 105 y/o wood won't need much to go up. Whether you could heat shield above IDK, I'm sure it's technically possible but I wonder what the manufacturer would say as well as your insurer.

To be clear are you saying that once a stove is installed you'll have something like 2' of clearance to the joist? Horsing wood down to the that basement all hunched over sounds unpleasant at best.

Couple things; unless the basement is insulated you may have a tough time getting any usable heat out of the stove since the walls will act as endless heat sinks. Getting warm air out of the basement to the living space can be problematic even when the walls are insulated. Considering the unusual install why not put the stove where you spend the most time? That's the best way to ensure you'll have heat where you want it.

Click to expand...

Althought the old stove is crap, we did manage to get some heat. Thing is that not only is the house not well insulated, but there's no air circulation. So only have of the house really got heat from the stove, the other half we had to use electric.

kennyp2339 said:

What about a nice tin / tin replica ceiling shield out on 1" spacers to allow air movement between the beams? 6'x6'

Click to expand...

While it's not Tin/Tin replica, it apear that the heat shield I talked about in my original post is screwed into 1" spacers.

Highbeam said:

I agree. Unsafe and unpleasant to put a stove down in this crawlspace. How about hammering out the floor and lowering it another 3 feet?

Click to expand...

Future plan is to either: lift the house up to have a full size basement - or - build an extension to the house which would have a full size basement. But we're talking 10+ years from now...

begreen said:

The stove needs 42" from stove top to ceiling. I'd plug the basement hole and tap a new one on the first floor. The new Quad is expensive and nice to look at. Put the stove where you can actually enjoy it, on the first floor. You will love the fire view and be able to enjoy the bone warming radiant heat while warming your buns in front of the stove.

Click to expand...

Not really an option... the kitchen is above the chimney location. Worth to mention that we don't care much about the look/view. We just want to save on electricity as much as possible. So maybe the Adventure II is over doing it? I really like the idea of thermostat control and longer burn time so that I don't lose my fire over night. We had terrible cases of back draft last year when the fire ran out at night and it was very cold the next day.

begreen said:

I think you will be hard pressed to find a stove that works well and legally in this circumstance. I was going to suggest a cat stove but the poor draft & low ceiling are working against you. By putting the stove upstairs the heating benefits will be greatly enhanced, even if it requires a new chimney.

Regarding the draft issue. Does the chimney have a stainless steel liner sized to the stove in it?

Click to expand...

I've booked and appointment with a "certified professional" from an association that covers our region. They will inspect our setup and tell us if it can accommodate a new stove.

As for the chimney liner - first I'm not sure I understand what you mean, but based on good pictures I don't think there's one. I remember last year when we (tried) to look inside the chimney... and I can almost guarantee there's no "liner". At least not in the horizontal part.

What do you guys think of this? http://www.drolet.ca/en/service-support/faq > "Is it possible to reduce the minimum clearances to combustible materials?"



Based on that, I could reduce the clearance requirement by 50%. Which might make things fit for my case.

begreen said:

Lack of chimney liner can be the draft and also a safety issue, especially if the chimney has no tile liner, but also if the chimney cross section is too large for the stove.

Click to expand...

I'm not sure I understand. Are you saying this specifically for my case (after looking at the pictures, chimney and stove size) or generally speaking?