Englander/Timber Ridge Venting Question

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

davekes10

New Member
Oct 30, 2015
2
Rockland County NY
Good Morning. I have been lurking around here for a couple of weeks and this is my first post. I have had a wood stove before, but never a pellet stove so am a complete novice with all things pellet. I will soon be purchasing 2 new pellet stoves. I am strongly considering the Timber Ridge 55-TRSSP01. I will be using 4" DuraVent Pro for venting. The stove manual says it requires a 3' minimum vertical run.
Due to conditions inside the house need to have a 5' vertical rise and a 2' foot horizontal. I will be coming off the back of the stove with a tee, a 5' vertical, 90 towards the wall and pass through the wall using a thimble and a 2' horizontal run. Can I then use a horizontal cap and be done with it or does the 3' vertical run NEED to be outside the house for drafting purposes?
Thanks in advance for your help.
Dave
 
That is the way mine is set up. Just bought the stove last month .Great stove , simple to run ,and more heat than I expected. You will like this stove.
 
Status
Not open for further replies.