Splitter tonnage experience

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
I have a 20 ton northstar splitter that I bought used 2years ago.It has a thin splitting wedge like bwise.157 splitter has.
If I get 20 inch or larger wood,I quarter it out.I like that thin wedge better than a wide wedge.Only thing against my splitter is I wish the wedge was taller.

I have used splitters with a wide wedge and had wood split but their was so much force built up, that the wood would launch out from the wedge.This is on splitters with the wedge is welded to the beam.And i have seen the beam want to twist also.

You mean like this:

IMG_2126Large_zpsf6e0c7c4.jpg
 
That's pretty nice. Looks like you've been splitting rocks!
 
  • Like
Reactions: TedyOH
Having some experience with Split-fire machines I have been left impressed with the design and performance. Split-fire machines I've used from rental shops come without the log lifter. After using one for a day with the log lifter/cradle we all agreed we split more wood and weren't as tired/exhausted. Three guys, 1 supplier, 1splitting wood and running controls, 1 removing split wood and stacking. Large logs we lifted with cradle and the small ones the supplier stacked on cradle when it was in up position. The guy splitting wood grabbed the wood off the table whenever he needed. We switched up positions every couple hours.
684 plus tax for that cradle option blew me away at first. Sure there is a table, cylinder, hoses, and a second valve. That ebay deal looks like it is stationary and the shorter pieces might fall through?

Doug A (Post# 12 Nov 1st)
Well I got almost everything split that I had hoped to. I tried to edit the thread title but couldn't see how.

MY MISTAKE!! Who woulda guessed? ;em;em;em;em

The rental guy showed me the on/off and the choke and said that was all that was needed and after I read begreen's reply, I checked the honda motor and the hydra pump to see if there was something I could do. OOPS. Seems the throttle was set at 2/3rds and when I moved it to full, the splitter had more guts. Still had trouble with some 24" Black Locust and some of the Y's I had set aside. It split most of it easily but the gnarly locust was still very slow, but it did make it through after a few attempts. We got big chunks stuck on the wedge 3 times and it took 5 min with a 6' pry bar to get it unstuck. Wedge moved fine but the wood was welded onto the wedge solid. I'll make sure I get a 27 hp or larger next time. My back is KILLING me and I need a stiff drink. Two days of splitting is not fun! :(:mad::(


If we get a piece stuck to the wedge we simply throw a short piece on the opposite side of the knife and split it. The stuck piece just slips off. We have rented machines with chainsaw and axe marks all over them. LOL! As far as tonnage it has been rare that we ever get a piece stuck on the split-fire 20ton model. It all depends on the wood and the skill level of the operator.

Anyways, time to buy a machine(new/not abused). Rental houses are flipping these every couple years. How long realistically should a Split-fire last me? Sales guy at Split-fire are saying 10-20years+ .... 100 cords + ppl that borrow??? Love the log cradle but... other options/worth money?? They where also talking about a 3" knife extension for large pieces, 60 bucks on the 3255 unit.

Looking for advice from Split-fire owners + any advice welcome.
 
I use an equipment ramp to roll the stuff I don't want to lift onto the splitter table. The ramparts top slips right into the slots in the table.
 
I'm looking at a used Iron & Oak 26 ton on Craigslist, and if I pick that up I'll need a cradle. Not crazy about the Iron & Oak cradle design or price,


I don't know about the design, but I've never heard anything but good about the quality. I bought some wedges and other things from them, and they were very good.
 
I'd love a log cradle on my splitter. It looks like a nice option when resplitting large rounds. When in horizontal mode it's a pita to have pick up the unsplit half of a log after you finish splitting the other half.
I've just been using a couple of 5-gal. buckets filled with water and stacking one on the other, on the other side of the I-beam from where I'm standing, and use that as a table. It's usually pretty easy to shove the half over on top of the buckets while you work the other half.
 
Status
Not open for further replies.