no power to castile pellets stove
- Thread starter loaderman
- Start date
-
- Tags
- control broad
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
Jake86
Burning Hunk
Make sure the power switch is in on position rear of stove. Check fuse located just below on off switch.
Wilbur Feral
Minister of Fire
TimfromMA
Minister of Fire
Jake86
Burning Hunk
First, I assume you have a Castle serenity pellet stove? If so, just above where the power cord enters the rear of your stove.
hooter04
Feeling the Heat
Jake86
Burning Hunk
[Q UOT E="loaderman, post: 2009910, member: 48365"][/QUOTE]
my Augerwasn't feeling well so I took the other out for the second time and then it had no power to the control box
my Augerwasn't feeling well so I took the other out for the second time and then it had no power to the control box
Check fuse check power cord jump snap disc from older no power jump snap this to no power I don't know how to check the control box for power
If you have a manual, locate #3 snap disc and see if it has been tripped. Some have reset buttons, some don't. You can also try to jump this snap disc by jumping the wires together to see if power returns. If for any reason stove got hot enough to trip this snap disc, it shuts power off to stove. kap
I was just checking auger for jams put it back together now I got no power. Fuse is OK.No blues flashing in box
First plug something else into outlet to make sure you have power. Also make sure power cord is plugged in good on stove. Then,unplug stove, pull control box out, and reinstall it. Plug stove back in. Let us know if anything happens. kap
Last edited:
- Status
Similar threads
