Got a BK stove near Monroe WA? want some free wood to test?

Would it not be simpler to get a moisture meter if you're that concerned? D. Fir burns well when dry there is no doubt about that.

Is that on a fresh split at room temp? Also fir is pretty easy to feel and hear if it's dry. Also when splitting it dry fir cracks apart cleanly except for knots or areas of funky grain. If the pieces are coming apart 'stringy' that's a sign of wetness.

Some pics may help.

I've never used a moisture meter but I've been burning primarily Doug fir my whole life.

Also to note fir will not cure with the bark on in log form. I've had elevated logs sit for upwards of 8 years with the bark on and when ringed up and split it still had moisture in it. The moisture went away quite quickly but it was still there. I've also had fir sit bucked and stacked but unsplit and with the bark on and it takes a couple years to cure. Cut split and stacked it can cure in one summer here if in a well ventilated area.

Kevin* said:

Got one, 13-15% on the 5 pieces I checked.
Just trying to eliminate fuel as the problem source.

Click to expand...

It would be easier for you to get some different wood and try it in your own stove I think than to try your wood in someone else's set up. Like kiln dried or pre-fab logs or something.

Having someone else burn your wood even in the same stove but different chimney and home and possibly technique isn't going to eliminate the fuel as easily as burning known good wood in your setup.

Also if your moisture readings are accurate the wood is fine and you're giving away firewood!