Stove sometimes goes out when on low. Auger seems to cycles as it should , but pellet don't always fall down the shute . Stove is clean,
Any ideas ?
Any ideas ?
1993 Austroflamm wont stay burning on low
- Thread starter buster 1
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
It could be a couple of things.
The collar on the auger is loose and needs tightening.If you can move the collar tighten it up with an allen wrench
The bushing may need replacing.
If you look underneath the bushing and you see a pile of "sawdust" your bushing needs replacement.
The collar on the auger is loose and needs tightening.If you can move the collar tighten it up with an allen wrench
The bushing may need replacing.
If you look underneath the bushing and you see a pile of "sawdust" your bushing needs replacement.
The auger works as it should . when on low the auger cycles on and off but pellets don't always drop into the burn pot and then it goes out .
The collar is tight , no bronze dust .
The collar is tight , no bronze dust .
Flammam
Feeling the Heat
- Status
