Why is there creosote in my stove?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
let the pics tell the story. EVL something like 50!?
 

Attachments

  • image.jpeg
    image.jpeg
    65.1 KB · Views: 760
  • image.jpeg
    image.jpeg
    68 KB · Views: 782
  • image.jpeg
    image.jpeg
    100.3 KB · Views: 652
Good grief!
 
Nice Hastings (or so it looks like). Interesting way of running the pipe.
 
They have as much in pipe and fitting as they do in the stove!!
 
  • Like
Reactions: bogieb
Greenfield or Hastings?
 
  • Like
Reactions: bogieb
holy elbows batman
 
Are they referring to the black stuff running down the pipe onto the towel? If so, is it raining or a high rain fall area? Seems to me that style outlet is not the best choice for that location on the house, and though I am certainly no expert, it looks to be oriented wrong for that location. Could it be that water is more the cause than routing?
 
Haha that's a good one...
 
Too many twists bends and turns too long a run? There is a formula to use for pellet stove venting as too how many elbows etc is acceptable.
 
That's a "ready, fire, aim....." install for sure ! The homeowner should at least get credit for the 4" pipe and the OAK ! :) The termination vent, which as it is set up functions more like a muscle car carburetor scoop, no doubt contributes further to a negative draft when the wind blows from that direction of the house. With no outside T / clean out, I can't imagine having to sweep all that exterior venting from the inside clean out.

Easy to be critical though when I'm not that homeowner just 'trying to make something work', unfortunately without having the big picture that you need to have a stove manufacturer compliant venting plan in mind for the outside of the house, before you can decide where the stove can go on the inside of the house.
 
Last edited by a moderator:
Are your pellets high in moisture? Is there enough combustion air? "Dripping" wet creosote is from smoldering wet wood. Has the output of the stove been considerably low?
 
Status
Not open for further replies.