I have installed this stove about 3 weeks ago. I'm getting to much air in my stove it blows the pellets out of the burn pot when. Stove setting is 4-4-1. I tryed it on 4-1-1 it's pretty much same thing. Anyone else have this problem
25-ip to much air in burn pot
- Thread starter Bax
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
BUBIBEAR
Burning Hunk
BUBIBEAR
Burning Hunk
No . It is for the low fuel feed. try 1-2-1 . Heat range 3 blower speed 5 . That what mine is running at now.
Last edited:
It's now on 1-2-1 for about 10 minutes and no difference. Starting to think twice bout getting this pellet stove.
I'm burning about 2 bags of pellets a day and heat output isn't even close to the stove my brother has and he is burning less pellets.
I'm burning about 2 bags of pellets a day and heat output isn't even close to the stove my brother has and he is burning less pellets.
Shane1
Member
You have to let it run for a little while when you change settings. At least 20 minutes. Also have you tried different pellets?
Yes I have tried different pellets it's just to much air coming in the burn pot it seems to me. emailed customer service and he said the same thing. I changed the air to the settings he told me to try and it makes no difference still same. I'll have to wait till Monday and try talking to them again
Shane1
Member
If you have some steel wool you could possibly prop the burn pot up a little bit to let the air an easier excape reducing the air going through the pot. Just to test it though not a permanent fix.
- Status
Similar threads
