Log load- $1000.00 delivered good deal?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

Bwhunter85

Feeling the Heat
Aug 21, 2010
259
Sunfield, MI
uploadfromtaptalk1453561190038.jpg
$1000.00 sound good price?
 
What's the estimated cordage on that load?
 
I'd be mildly surprised if you could get a log load with that quantity and or type of logs delivered for $1000. so in my opinion yes... it's a good deal if it's for real.
 
  • Like
Reactions: drz1050
I tend to agree with posie. It is a lot of work. You know it's not earth science. All you need to do is take a tape measure to it. It should take you 20 minutes to figure out the cords. You also want to take a moisture meter to it.

I think this guy saw you coming. Counter with $400.
 
  • Like
Reactions: Jeffm1
I got ripped off bad on a log load and the whole cutting and splitting was simply exercise. And I paid them for my labor.
It inspired me to stop buying altogether.
Find someone you will do repeat business with. So its not a fly by night deal.
 
I agree with Wood Wules, a tape measure to get a close ballpark on the cord amount would be best. Is he charging mileage on the load as well, or is that included?
 
I tend to agree with posie. It is a lot of work. You know it's not earth science. All you need to do is take a tape measure to it. It should take you 20 minutes to figure out the cords. You also want to take a moisture meter to it.

I think this guy saw you coming. Counter with $400.

Why would you take a moisture meter to test logs? They are going to be wet in log form.

As mentioned, the going rate is $100/cord in log form. Doesn't seem like a worthy deal.
 
  • Like
Reactions: Jeffm1
Gotta laugh at the mention of using fossil fuels, especially propane & fuel oil, at the "Hearth" forum. Now if the member has natural gas available that is another thing.
 
  • Like
Reactions: Dantheman300z
Gotta laugh at the mention of using fossil fuels, especially propane & fuel oil, at the "Hearth" forum. Now if the member has natural gas available that is another thing.

Yea I like my $35 gas bill too much to go back to using the furnace even with gas as cheap as it is these days.
 
I tend to agree with posie. It is a lot of work. You know it's not earth science. All you need to do is take a tape measure to it. It should take you 20 minutes to figure out the cords. You also want to take a moisture meter to it.
I think this guy saw you coming. Counter with $400.
he probably just recently cut them.....take a moisture meter to them???? thats not going to be ready for a couple of years at best. good deal? not sure but at least you can get some log length loads i can't seem to find any around southern maryland.
 
I don't know that looks more than 6 cord. Its hard to tell though i know we typically get 6 to 7 out of a straight truck so i would guess 8 or so for that at least. But yeah $100 a cord for logs here to depending on species.
 
  • Like
Reactions: bad news
my brother paid about $700 for a picker load of cherry logs.....think he said he got about 7-8 cord.......but that was a couple of years ago in upstate n.y.
 
I say just measure it. For speculation do you think each bundle is about 8 by 8 by 8? That would put it over 10 cords. If you go to HF they often have free tape measures.
 
I paid $500 for a 10 wheeler load of oak logs last spring, stacked out just shy of 6 cord....... That's got to be 7 or 8 cord
 
  • Like
Reactions: black_sab
Status
Not open for further replies.