manual hydraulic wood splitter

There is no way I'd consider buying a splitter I had to pump manually - The ram goes out leaving only an inch between the end of the wedge & pushplate even on my almost 40 year old Didier, how can that not split stringy wood?

what kind of wood are you trying to split? might be better off if you could find a used gas splitter someplace. i would think that the manual hydrolic splitter would be a pita.

It seems to me that splitting with a good splitting axe, Fiskar's Supersplitter, for example, would be less effort than a manual-operated splitter. Have you tried alternatives to a heavy maul?

Well that's not as bad as some as the wedge is adjustable so with reservations ok, But will likely get some leg cramps from that.

I'd turn the furnace on before I used that thing from Grizzly

Heck of a way to get exercise. Don't you think swinging a maul or sledge hammer and wedge would be faster and easier.

Charles2 said:

like this one: http://grizzly.com/products/8-Ton-Log-Splitter/H8100

Click to expand...

That thing looks like a butt kicker!

http://www.amazon.com/s/?ie=UTF8&ke...vptwo=&hvqmt=b&hvdev=c&ref=pd_sl_95izd77rzy_b
here are a few options on amazon. i've seen a video on the "smart splitter" someplace else but with stringy wood, probably won't work well

If it's exercise you're after there are easier ways to get it. Those manual pump splitters are god-awful slow and can work you to death. Especially so with stringy or gnarly wood.

The push plate on our splitter doesn't go all the way to the wedge. For most wood it isn't an issue. But we used to split a lot of gum with it and gum fights all the way down to the last fraction of an inch. To get a round or partial cut through, I'd keep a short piece of 4" round aside to use as a pusher block. Push the round to the end of the stroke, back it off a few inches. Lay the pusher sideways in front of the plate and run the ram forward again. This will force the tough piece all the way through the wedge and cut any stringy stuff.

Charles2 said:

Is there a hand-operated splitter that you would recommend?



What's wrong with it? Is there some other type you would recommend?



I've got a pinched nerve in my neck that's giving me a lot of shoulder and arm pain, so I'd better not swing anything.

Click to expand...

I can understand if you have nerve problems that prevent you from swinging altogether, but if you have full range of motion I believe a lightweight splitting axe would be a lot easier and faster than a manual splitter, and wouldn't put too much strain on your neck. I am an average size guy of normal strength and there are lots of rounds that I split without really putting any oomph into the swing. Some I can split with one hand. Seriously, I am not kidding about that and I am not some giant guy. If you can swing an axe I'd buy a light splitting axe like the 2.5 pound Fiskar's Splitting Ax I use and split all the straight, easy pieces with the ax. I'd put difficult ones aside and occasionally rent a gas splitter to split the hard ones.

I have split at least 30 cords of wood by hand, taught kids as young as 11 to split by hand, and haven't yet had an accident. If accidental injury is your concern (as opposed to aggravating a medical condition) I wouldn't worry. Splitting wood is pretty safe in my experience.

if you can't swing an ax at all, I'd probably buy a gas splitter. The manual one seems like a ton of work, and unlike splitting with an ax, not any fun.

Could always get someone with a splitter to split it for you would just have to work something out with that person.