Just a Little Fruit Tree They Said

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

Lcback

Feeling the Heat
Feb 21, 2016
364
Pennsylvania
My dad said this little old lady from church wanted an medium sized apple tree taken down.
Show up at 5 planning on being done by dark. With the 42cc saw and my dad's little greenworks 40volt battery saw.

What we found though was something a little more substantial.
Large maple. Atleast it's far from the houses or power lines. And she said it can take as long as we need to. Gotta love free and little old lady's. 22312e2cd0e8e3a552022f7dab98317b.jpg
ad818cad6f38c8ad3edcdbae16dbd818.jpg
 
Nice! I guess it's better than a "big oak". That turns out to be a small willow!
 
Nice open area and free wood. Good deal in my book even if there was a little confusion.
 
Nice job with a 42cc. I assume 16in bar. What is the diameter at the bottom?

I wonder what kind of fruit she was getting off it.
Nope that saw is my father's. Pro Mac McCullough he got of Craig's list for $150 heck of a deal. 70cc and 20" bar. We weren't far from the lady's house. When we saw the tree he went back and got it.
The tree measures 35.5" through the middle.
 
  • Like
Reactions: Mag Craft
That makes more sense. You should take more pictures as you work it. What kind of splitter do you have? Each piece cut up must weight a lot.
 
Yep now that I see it down with the saw on the stump it is a good size tree. Lots of good firewood.
 
That makes more sense. You should take more pictures as you work it. What kind of splitter do you have? Each piece cut up must weight a lot.
Will do. Probaby won't get to it again for close to a week. Regular jobs and all that.
Don't have a name for the splitter. My grand pap made it 35 years ago. He took scrap from the steel mill he worked at and welded it up. No motor then it connected to his tractor PTO. Now all the big tractors are gone my dad hadn't used it for a while just burning coal. Then last year I decided to start burning wood be pulled it out of the woods and rebuilt the cylinder, valve and pump, and connected a 6hp motor.
Sorry for the story book, grandpa passed away a month ago, and I'm of my proud of that ugly machine.
 
Wondering what kinda apples came off it.............
 
  • Like
Reactions: Jeffm1
Nice firewood score, sounds like a sweet old lady too. Condolences on losing your Grandpa, very cool doing the splitter restoration for you. Hope you get to run it for many years to come...
 
Splitting up the last of the big stuff. Snapped this picture. View attachment 178955

Sent from my LG-D850 using Tapatalk

How did you get that big round into a horizontal position on your splitter?

1) I have a lift on my splitter
2) I rolled it right off the truck onto a rack on the splitter (it never saw the ground)
3) I had 2 helpers besides myself
4) The tractor is outside the picture frame
5) I am so strong!
6) Other
 
Haha. Quad ramps.
My father and I rolled it up ramps relatively easy. The hardest part was keeping our halves from falling back on the ground.
Still wasn't easy, it's amazing how heavy green wood is. The stuff was wet too, you could see the water dripping out as the wedge went in.

Sent from my LG-D850 using Tapatalk
 
I'd be cutting them down with the saw before moving them. Easier to lift and move. Fun too!
 
I'd have the splitter set up for vertical splitting for all the large rounds.
 
  • Like
Reactions: Highbeam
Splitting up the last of the big stuff. Snapped this picture. View attachment 178955

Sent from my LG-D850 using Tapatalk
I took down a maple and ended up with rounds just slightly smaller then the one you show. I lifted them myself. My estimate was 275-300lbs each.

I'm very used to dead lifting 300+ lbs at the gym for quite a few reps. But its not the same as picking something weird and ackward off the ground. No handles! LOL
 
No handles and these maples seem to hold a lot of water. They were splippy, and sometimes the bark can just peel off where you are holding them.
I couldn't have done them myself at least not without hitting the gym for a few months first.

Sent from my LG-D850 using Tapatalk
 
Status
Not open for further replies.