swalz said:Is this mod also for the Harman XXV; I just had one installed about 3 weeks ago and I am getting a lot of clinkers and at the bottom of burn pot chunks of carbon on the sides and in front of the auger. I am also getting a lot of ash on both sides inside of the fire box and the glass gets very dirty after 6 - 8 hours of burning. The dealer doesn't seem to be much help and they have a new owner that took over after I bought the stove.
I have attached a picture of my burn pot after burning for about 6 hours after scraping.
Clinkers happen...swalz said:Is this mod also for the Harman XXV; I just had one installed about 3 weeks ago and I am getting a lot of clinkers and at the bottom of burn pot chunks of carbon on the sides and in front of the auger. I am also getting a lot of ash on both sides inside of the fire box and the glass gets very dirty after 6 - 8 hours of burning. The dealer doesn't seem to be much help and they have a new owner that took over after I bought the stove.
I have attached a picture of my burn pot after burning for about 6 hours after scraping.
GVA said:Clinkers happen...swalz said:Is this mod also for the Harman XXV; I just had one installed about 3 weeks ago and I am getting a lot of clinkers and at the bottom of burn pot chunks of carbon on the sides and in front of the auger. I am also getting a lot of ash on both sides inside of the fire box and the glass gets very dirty after 6 - 8 hours of burning. The dealer doesn't seem to be much help and they have a new owner that took over after I bought the stove.
I have attached a picture of my burn pot after burning for about 6 hours after scraping.
the glass getting dirty is either a poor pellet or a draft problem,
was the stove draft tested? it looks like the flames are leaning towards the glass in the pic but hard to tell...