About a cord? Give or take

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.

cord

  • Yes

    Votes: 6 85.7%
  • No

    Votes: 1 14.3%

  • Total voters
    7
Status
Not open for further replies.

Kosmonauts

Member
Jan 15, 2016
220
Pennsylvania
hey,

I know a cord is 4x4x8 and I have this only one split deep. What you guys think looks like about a cord maybe a hair under? Not bad for my first year ever eh?
 

Attachments

  • image.jpeg
    image.jpeg
    246.5 KB · Views: 367
Looks like about 6 northern virgina cords.

Sent from my SM-G900V using Tapatalk
 
If that is 4 feet tall, one 16 " split deep (1.3 feet ) and 32 feet long ( 40" x48" skids - using the 48" for calc, dunno how the skids are laid out the long or short way )
then that is 4x1.3x32= 166 cu ft.
166/128=1.3 cord.

if the row is only 30 feet long then you're closer to just under 1.25 cord
if the height is less than 4 feet you're even closer to 1 cord

if the splits are 18 or 20 inches then you need to calc that decimal equivalent instead of 1.3
 
If that is 4 feet tall, one 16 " split deep (1.3 feet ) and 32 feet long ( 40" x48" skids - using the 48" for calc, dunno how the skids are laid out the long or short way )
then that is 4x1.3x32= 166 cu ft.
166/128=1.3 cord.

if the row is only 30 feet long then you're closer to just under 1.25 cord
if the height is less than 4 feet you're even closer to 1 cord

if the splits are 18 or 20 inches then you need to calc that decimal equivalent instead of 1.3
Ahhhh ok thanks SOOO much
 
If that is 4 feet tall, one 16 " split deep (1.3 feet ) and 32 feet long ( 40" x48" skids - using the 48" for calc, dunno how the skids are laid out the long or short way )
then that is 4x1.3x32= 166 cu ft.
166/128=1.3 cord.

if the row is only 30 feet long then you're closer to just under 1.25 cord
if the height is less than 4 feet you're even closer to 1 cord

if the splits are 18 or 20 inches then you need to calc that decimal equivalent instead of 1.3
Why did u divide by 128 if I may ask?
 
I make it 1.3 cord.

bob
 
  • Like
Reactions: CentralVAWoodHeat
Why did u divide by 128 if I may ask?

128cu ft is 1 cord


a cord can be expressed in cubic yards, feet, inches, or meters as long as it is equivalent to 128 cubic feet
 
It's about 28 feet long and 4 feet high with the average 16 inch split


so 28ft x 4ft x1.3ft =145.6 cu ft
145.6 cu ft /128 cu ft = 1.1375 cord

or
145.6 - 128 = 17.6 ( 17.6 cubic feet is your one cord overage)
17.6/128 =0.1375 ( to calculate your overage in a decimal equivalent fraction of a cord )
 
  • Like
Reactions: Kosmonauts
Do tell: What kind of wood is this 1 cord + ?
 
  • Like
Reactions: Kosmonauts
Nice job as told earlier looks like little more than I cord plus if your measuring you know for sure. Regardless looks good.
 
  • Like
Reactions: Kosmonauts
Do tell: What kind of wood is this 1 cord + ?
White ash, black cherry, black locust and some black birch. I mixed it so the heavy hitters like locust and birch are towards the middle and end. Especially that rack by itself there's a lot of locust in there for the super cold day. That's my premium basically...
 
  • Like
Reactions: Lakeside
i really need to get my stuff all stacked in one location... i was thinking that i need to buy my friends some beer, finish taking down the 12+ trees in my yard that are mainly dead, drag the other stuff out of its final resting place, and then rent a splitter..... right now I have about 1.5 cords stacked and split. i will have one of my engineer friends figure out the volume of the random piles of pyramids, pallets, piles, stacks, racks, benches, forts, etc but i think i probably have about 3 cord that need to get taken care of?
 
  • Like
Reactions: Kosmonauts
Status
Not open for further replies.