How do you measure a fireplace?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
C

CharlieChan

New Member
May 4, 2016
2
Central Texas
Hi everyone-
I live in central Texas and have a fireplace that is largely for ambiance. I grew up with a word burning stove and would like to put a stove in my home for what little winter we get here (it's not much, but the cold drives my electric bill through the roof.)
My question is this- how do I measure my current fireplace to know which stoves to look at for an insert?
 
See if you can use this...
upload_2016-5-4_17-10-38.png
 
Hey thanks for the info. Mostly, I needed to know how to measure the firebox etc. I have a brick hearth, so the infrastructure is all there. But the fireplace is a money pit.
 
That guide is right out of a Regency wood insert brochure.
I have had many customers use it to determine what unit will
fit in the masonry structure in their homes.
Not sure what else you need.
 
The main measurements you will need is the width of the firebox opening, the height of the opening and the depth of the firebox.
There are things to also consider, like does the firebox floor drop down, some are recessed about an inch or so. It's not a big deal, but if you select an insert that protrudes from the firebox the insert will need to be raised and so your height will need to take that into consideration.
Also there are measurements needed for the hearth in front of the fireplace, and mantel or other combustible materials. Sometimes the Surround (flashing) that covers the gap between the insert and fireplace opening may not cover what you have. There are ways to take care of these issues, just something to keep in mind.
Most inserts and fireplaces there is minimal room the make the liner connection (by code you need a stainless liner in the flue), but once again there are many products available to help out.
I'm sure others can help explain other things that I forgot.
 
You'll need the height and width at the fireplace opening, depth at the top and bottom, and the height and width at the rear of the fireplace. Also need will be the distance to nearest combustibles which typically are the legs and ledger of the mantel.
 
Status
Not open for further replies.

Similar threads

S
Old Portuguese Kitchen Fireplace needs....help
Replies
3
Views
428
The Hearth Room - Wood Stoves and Fireplaces
begreen
begreen
Immanence
Newbie Question: Minimum Fireplace Size
Replies
2
Views
831
The Hearth Room - Wood Stoves and Fireplaces
Immanence
Immanence
Jeff15
Are there any EPA fireplaces with an open door or screen option?
Replies
6
Views
764
The Hearth Room - Wood Stoves and Fireplaces
begreen
begreen
O
tiny wood burning insert or stove advice needed for a rookie
Replies
8
Views
625
The Hearth Room - Wood Stoves and Fireplaces
scaryflame
S
N
Wood stove insert in basement fireplace rebuild?
Replies
3
Views
618
The Hearth Room - Wood Stoves and Fireplaces
begreen
begreen
Top Bottom
Back