Mantel build - Australian Red Gum

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

Hills Hoard

Minister of Fire
Mar 19, 2013
700
Melbourne, Australia
Have been meaning to build a mantel above my insert for a long time. Here is the final product I was really unsure about the look and design I wanted, and not being the most handy person when it comes to building and construction I was really stumped for ideas and how to execute this project. After a few Youtube clips and a few phone calls to friends who are tradesmen I came up with this .

I had a length of red gum that i cut to length.

Wood raw 1.jpg

Wood raw 2.jpg

i sanded for about 3 beers then used linseed oil.

wood oiled 1.jpg

I didn't like the idea of brackets to support the mantel and i didn't want a full mantel with supports surrounding the insert. 1 because I couldn't have built it, and 2, because i just wanted a clean looking shelf. We don't have a big space in the lounge room so a large ghastly mantel would have been to invasive. So a builder friend suggested a floating mantel which only involved drilling holes for rebar, using construction adhesive and setting them in place. easy, even for me.

rebar 1.jpg

Next I just drilled corresponding holes in the mantel and (thank f***) it slotted straight on.

mantel 1.jpg

Really happy with the result. now i have a place to rest my beer while keeping warm by the fire!

mantel 2.jpg
 
  • Like
Reactions: Apprentice_GM
i sanded for about 3 beers then used linseed oil.

I would have just stayed with beer - hate the taste of linseed oil . . .

Nice job! Here's a tip for "next time" based on the "thank **** the mantel holes lined up" comment;

Next time, drill the holes in the mantel first, put the bar in them, then tap the mantle against the wall. You'll have a very accurate mark for where to put the bars into the wall . . .
 
I would have just stayed with beer - hate the taste of linseed oil . . .

Nice job! Here's a tip for "next time" based on the "thank **** the mantel holes lined up" comment;

Next time, drill the holes in the mantel first, put the bar in them, then tap the mantle against the wall. You'll have a very accurate mark for where to put the bars into the wall . . .

thanks for the heads up. Hopefully there wont be a next time though!. haha...my construction work around the house either works out really nice or is an absolute disaster.
 
i sanded for about 3 beers then used linseed oil.
Glad to know that even though you live in a different part of the world, we tell time the same way..Keep up the good work.
 
  • Like
Reactions: Hills Hoard
I like the milling/tool marks left on the slab! Also, beer may make sanding much less of a burden so I may have to try that some;lol. Nice work!
 
Status
Not open for further replies.