counrty comfort wood stove

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.
C

CMOZAEKO

New Member
Feb 11, 2008
29
Connecticut
can anyone give me any information on where i can get a manual for this type of stove. just bought a used one and. also where can i get additional parts for it. i am not sure who is the maker of it. any info would be greatly appreciated.

thanks
-Cristine
 
Cristine,

Country Stoves are now owned by Lenox. I didn't see a manual for the stove you have on their web site but try a Dealer as there are several in CT.

www.lennoxhearthproducts.com

Hope this helps.
 
Which model is this stove?
 
i am not to sure. as soon as i find out i will let youy know. you might think thatr is crazy but we are buying it from someone. i will ask them for it today and get back to you.
 
the model # is cc200 by country comfort. can anyone let me know where i can get any info on this stove as lennox cannot help me when i called them.
 
cmozaeko said:
can anyone help?
Click to expand...

Online search revealed nothing.. Lenox has to come through on this one...

Ray
 
Dean's in Plainville, CT has Lennox, they may have knowledge in the shop on this.
 
i have tried with lennox and and they have told me more than once that they dont have any info on the stove. and i am not sure if deans would have anyinfo and this stiove was built in 1986. i didnt think that this would be so hard to find and get the info. my husban and i are not to sure how to run this stove and dont want to burn the house down either. do all wood stoves kinda run the same? not even sure if the stove is non catalytic or catalitic... is there a way to tell? so many questions so little answers
 
No, Country Comfort is not Country.

Country Comfort was made my a company in Ohio called Orville Products.

They stopped making these. I found this message on another board:
When Orville Products, the manufacturer of both Country Comfort & Comfortec closed their doors, Follansbee Steel,a sister company, assumed the inventory of parts for warranty and service.

800-624-6906
M-F 7-3
DAN

Let us know if that gets you anywhere....
 
cmozaeko said:
can anyone give me any information on where i can get a manual for this type of stove. just bought a used one and. also where can i get additional parts for it. i am not sure who is the maker of it. any info would be greatly appreciated.

thanks
-Cristine
Click to expand...

I think you are SOL on a manual for the stove Cristine. What parts are you needing for it? As to how to burn the stove Craig and some of us old farts here can probably get you as close on that as anything. The key concern is the condition of the stove and how you have it installed.

Hit us with some pictures of it.
 
ok here are the pics.
 

Attachments

  • Open.JPG
    Open.JPG
    13.4 KB · Views: 2,856
  • panel.JPG
    panel.JPG
    19.9 KB · Views: 2,919
  • Stove.JPG
    Stove.JPG
    20.4 KB · Views: 4,076
so now what?

my husband and i are not to sure how to run this stove and dont want to burn the house down either. do all wood stoves kinda run the same? not even sure if the stove is non catalytic or catalitic… is there a way to tell? so many questions so little answers also how do we run it? VERY NEW at this wood stove stuff.
 
Pretty much they run similar - that is a relatively modern unit.
First determine if it is cat model. I can't see the label close enough - do you see a model #?

Look at the area in the upper part of the firebox....if the unit is a catalytic, then there will be two things:
1. A bypass level of some sort which need to be pulled when the unit is loaded and started
2. A place where the catalytic sits - usually round, although some are rectangle. If the cat exists in there, you will see it - it has a honeycomb look.

My friend Josh, who owns:
http://www.hearthandpatiostore.com/

his family used to sell that brand. If you email him and be really, really nice....who know, maybe he can identify the model (email pic) and also may have a manual laying around.
 
called Follansbee Steel and spoke to dan and he has a manual and will be sending it to me in the mail!!! Yippeeeeeeeeee. also so what am i looking at in the pic i attached in my previous post?
 
Thanks for the link above, the model number is Country Comfort CC200. Does anyone have a ballpark figure of what the MSRP woulb be? I just want to know if i got ripped off or a good deal, LOL. Now we are in the hunt for wood, We have time though we are not installing until spring.
 
i just wanted to sa THANK YOU for all the help that this forum has given me in trying to figure out the stove that i have. this site will DEFINITELY be a bookmark on my PC!!!

-Cristine
 
Status
Not open for further replies.

Similar threads

H
Need help with stove identification
Replies
5
Views
517
Classic Wood Stove Forums (prior to approx. 1993)
begreen
begreen
S
Basement wood stove to heat house? New build, ICF basement.
Replies
5
Views
356
The Hearth Room - Wood Stoves and Fireplaces
begreen
begreen
C
Help IDing stove, and any tips/tricks welcome
Replies
9
Views
969
The Hearth Room - Wood Stoves and Fireplaces
begreen
begreen
A
Wood Stove lack of comparison / operational demos
Replies
9
Views
847
The Hearth Room - Wood Stoves and Fireplaces
EbS-P
EbS-P
Rocksy
Is a Wood Stove Right for Me?
Replies
10
Views
861
The Hearth Room - Wood Stoves and Fireplaces
Sealcove
Sealcove
Top Bottom
Back