Pelleduster?

Tristan said:

I finished making the contraption last night. If you think that the dust will not effect your auger syster or hopper, then all the power to you. The machine WORKS GREAT. Well worth the effort, money and time. To make a statement such as "if you are getting that much dust/fines in your pellets, then just try another...." is a great theoretical statement to just throw out there. I have tried many different kinds - and unless the pellets you are buying is sealed in a clear, see through bag ... no matter what brand of pellets you buy ... there will always be that wonder "box of chocolate" surprise. Thats why i do not buy my pellets by the ton. I have had great bags with excellent, minimal dust/fine; while on another purchase, same brand, same retailer, i have gotten crappy dust laden pellets. So i paid $6 lousy dollars for the plans and instructions, bought a shop vac, which i needed anyways, some pvc piping, and invested 3 hrs of my sunday. - the result is a piece of mind for a $5000.00 investment. YES PEOPLE ... THE CONTRAPTION WORKS. If you would like, i can post picture of the collection bin from the vac. Three guesses as to what you would find in there. Thank you.

Click to expand...

Yup, I echo this. I built one about 6 months ago. Where I live the pellet quality is all over the map. I had a spare shopvac so I just dedicated it to this use. My old Austroflamm wasn't too picky about what I put in it, would burn it, fines and all.

The new stove however is WAY different. It's fussy about not getting fines, plus the slot to the hopper is smaller than your hand so vacuuming out the fines is nearly impossible. I figured it's easier to just feed it clean fuel. I don't mind cleaning a few bags at a time, I just fill 5-gallon buckets and tote inside as necessary.

Now I buy my fuel by the ton, as the weather can be really unpredictable and if we're 'iced in' then it's tough to get to the feed store for a few bags of pellets. But a lot of the fines in the bags comes from handling. Sometimes the handling equipment at the mill (and the kids at the feed store) can bust up the pellets and create a lot of fines.

I built mine out of ABS; PVC in those sizes is rare around here as it's against local codes to use it for drain and waste. I spent about $90 on the whole thing and will be sharing the plans with my brother in law to help relieve the cost a bit.

One thing I noticed: You have to be careful about how fast you feed it. Mine seems to want to have some air rushing past the pellets as they are being fed. If I just fill the infeed, then it wants to clog and the shopvac will suck the pellets straight through. Then I have to open the shopvac and scoop 'em out. I do that anyway periodically; I just throw the whole mess, pellets and dust, into a bucket and feed it through again. Presto- pellets recovered.

I also noticed that if I had a bag of pellets that had gotten wet (like from me using them for ballast in the pickup) that once they'd dried out, I could bang the bag around to break up the marginal pellets, then run them through the machine to suck up the ones that had broken completely down.

Hope this helps clarify a bit.

The one I built isn't a cyclone. They look pretty much the same but mine has no internal baffles. No problem with dust blowing back out the top. The cyclone thing sounds intersting though.

Feeding the pellets in at a steady rate is a bit tricky. You might consider drilling a couple of small holes in the Wye above where the vac comes in to supply make up air so it won't eat whole pellets when the neck of the funnel gets full.

Hey Tristan,

Out of curiosity...

Did you actually have issues with the fines or are you trying to prevent
possible problems?

tinkabranc said:

Hey Tristan,

Out of curiosity...

Did you actually have issues with the fines or are you trying to prevent
possible problems?

Click to expand...

No I was not having trouble with the fines/dust. Its more of a preventive measure. I figure a $5000 investment is worth $5 for the plan and $90 for the parts to build this thing. Besides, when its built, the thing just looks damn cool standing there in my garage. It screams for attention: "WHAT IN THE WORLD IS THAT?" Also, you will notice the amount of dust coming from these bags as you empty them into the hopper is no laughing matter. We have little rug rats in the house, and one of them is sensitive to dust (esp in winter because we cannot open windows to air out the house) - so instead of adding more dust via the pellets, i take a little time to clean out the pellets before i bring them into the house. Another reason is that these pellets are "luck of the draw". Sometimes you get good bags with min. dust/fines; yet sometime you get crap - and yes ... from the same exact brand - as they say ... different day, different plate of sh*t. Good luck friend.

just bumping this great thread for any newbs like myself that are interested, i ran across the plans but can onlu find them for $25, is there anyone who has the plans that is interested in selling them to me for $6??

Can one of you post some pictures?

i would like to also see some pics of peoples home made setup

There is nothing on ebay that I can find. I have typed it in every possible way.

not being sold on ebay now
you can find the plns at
http://www.pelleduster.com/
anyone willing to post pics of theirs??

Here is my pellet duster...............

I"d pay $25 for that!

Is the suction on the top fitting or the bottom?

nice to see a little humor on this board

EJW1 said:

Is the suction on the top fitting or the bottom?

Click to expand...

The suction is applied to the top; the way the "improved design" works, you apply the vac's exhaust to near the bottom. I can see how it helps - it creates a closed loop that keeps the really fine dust down because it's recirculated until it's finally caught by the vac. It would also tend to boost the strength of the column of air inside the duster.

How about scooping the pellets out with a small strainer, shifting them around to get the fines out over a trash can? Cost ~$2.

steamguy said:

EJW1 said:

Is the suction on the top fitting or the bottom?

Click to expand...

The suction is applied to the top; the way the "improved design" works, you apply the vac's exhaust to near the bottom. I can see how it helps - it creates a closed loop that keeps the really fine dust down because it's recirculated until it's finally caught by the vac. It would also tend to boost the strength of the column of air inside the duster.

Click to expand...

Oh, you're talking about the pelleduster, now I'm tracking again....

Tried buying the plans online and get a Paypal error. Emailed the site addy and got a reply that they'd look into it...nothing since. :-( Time for me to figure out how to make it myself.

"How about scooping the pellets out with a small strainer, shifting them around to get the fines out over a trash can? Cost ~$2."
sounds like a lot of work for 2-3 tons of pellets

Couple of links to get you started...

http://www.cornvac.com/

http://cgi.ebay.com/Corn-Cleaner-fo...ryZ41987QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

If you do web searches for "Corn Cleaner" you will have a lot better success. Second link is to an eBay store, just to show you what's on there.

I recommend something that uses a shopvac to help out; tried manually sifting the pellets and it was a tremendous mess. And slow. And frustrating.

Hope this helps you.

has anyone used the corn vac for pellets?
i will need a storage container near my pellet bags, a hose into the cornvac over a bucket and a hose from the cornvac to my shopvac
questionis does my initial storage conatiner need to be airtight as well, say i get a large plastic storage conainer that you would put clothes in you attic, do i need to worry about moisture getting in? and how closedoes the hose need to be into the pile in there for it to suck into the cornvac?
i will look on the corn forums well

offingmoot said:

i would like to also see some pics of peoples home made setup

Click to expand...

Here's a photo of mine. Was in the middle of some other work, and the pellet duster stuff was just shoved to the side. My wife would kill me if she saw that I made a photograph of my workbench while I was in the middle of a project, so I took a moment and fuzzed it out.

You can see that I had to build it out of ABS; which essentially doubled the cost of the entire gizmo. But it does work well. Got a couple of mods for it that I'm going to try once I have some spare time from doing yard work.

very nice and thanx for the pics

offingmoot said:

very nice and thanx for the pics

Click to expand...

No problem. You can see that I used a 5.5HP shopvac which is about twice the recommended power for the duster. I want to try putting in a baffle to 'spin' the air inside the duster to make it more of a cyclonic separator. This will burn off some of the excess horsepower, but is going to take a while to get to... (low on the list...)

I guess I'm either very lucky, or missing the whole point. To date I've burned approximately 40,000 lbs of pellets, many different brands, hard and soft wood varieties without dusting or massaging them in any way without ANY problems.

itworks said:

I guess I'm either very lucky, or missing the whole point. To date I've burned approximately 40,000 lbs of pellets, many different brands, hard and soft wood varieties without dusting or massaging them in any way without ANY problems.

Click to expand...

Well, I burned 15 years' worth of pellets in my old Austroflamm, and could easily reach into it to periodically clean (vacuum) the accumulated fines out of it. It was necessary to do that every couple of weeks.

Consequently, I NEVER had an auger jam, NEVER replaced the auger motor in all those years. That's burning at least 3 tons a year, sometimes as many as 4 or 5. Those old Austros were built like tanks.

But with this new stove, the access into the feed hopper is so narrow that I can't get my hand into it to properly clean it; and so I need a different way to control the amount of accumulated fines in the bottom of the hopper. Therefore the only way for me to do so with this stove is to keep them from going in there in the first place.

You might also be really lucky to be able to obtain fuel that is consistently low in fines. Some of this stuff I get in this area can have a double-handful of fines in a single bag.

Hope that explains it sufficiently.