RUNNING EKO IN THE SUMMER/pool ect.

I have one more hurdle before ordering my new eko 60. I will be using two 500 gallon propane tanks in my cellar, along with the wood boiler. I have hot water baseboard in the house. (5 zones) I want to run a zone to my shop 120' from boiler, and put baseboard in my shop with some kind of bypass, so in the summer, I can heat my 20,000 gallon above ground pool. The pool is ten feet from the shop. If I leave the heat on the pool for 24/7 until it reaches 88 degrees, will the boiler run full out or short cycle and affect the life of my boiler. I sure could use some help as this was part of the sales pitch to my wife and carries a huge amount of HDWF. (Heavy duty wife factor) Thanks, TUG HILL ROOKIE

Thanks, I currently have a 40 gallon hwh oil fired, to heat our pool. unless its warm out, it never gets 88. The pool pump pushe's cold water to the hwh and then a circulating pump helps push the hot water back to the pool. (all 3/4" pipe) any ideas on how to get the most heat into the pool, with my outside shop/pool boiler zone? THR

I am willing to do anything i need to ,so long as once the zone is in my shop,i can use ball valves to send heat either to the pool or shop baseboards. Once i have a hot line in and cold return line in my shop, can i incorparate the 40 gallon, oil fired hwh, to heat our pool? Thanks, THR