I decided to start looking at a pellet furnace but now have found they are hard to come by. I wanted to go with a harmon but as we know thats out. The one furnace i have found that i can actualy get in august is a us stove model 6100 is this a good choice? It is coming form a reputable place. But not sure on the quality. This furnace will be used to supplement my oil heat in a 2000 sf house. Thanks for the help
pellet furnace ?
- Thread starter mchud
- Start date
-
Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.
We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.
We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
- Status
webbie
Seasoned Moderator
Are there any Magnum furnaces available?
http://www.americanenergysystems.com/magnum7500.cfm
Relatively reasonable, reliable and made my a very small company....they also help sponsor this site!
Nothing against US Stove, but it might be tougher to get information and service on them since they tend to sell through tractor supply and such places - where info and service cannot be had.
http://www.americanenergysystems.com/magnum7500.cfm
Relatively reasonable, reliable and made my a very small company....they also help sponsor this site!
Nothing against US Stove, but it might be tougher to get information and service on them since they tend to sell through tractor supply and such places - where info and service cannot be had.
Thanks for the info i cobntacted a dealer this morning and they were full of info. It looks like i am probaly going to go with the magnum. Unless any one has any other suggestions. Thanks again
hossthehermit
Minister of Fire
drewmo
Feeling the Heat
Not sure of availability in the US, but a neighbor has an HS Tarm MB-Solo and is quite pleased with it.
Thanks i will check them out. Too many choices, Probaly should of thought of this earlier in the year. Thanks for the help
sinnian
Minister of Fire
I just ordered a Magnum 6500 furnace. thanks for all the advice. They seem to be a good unit and realy couldnt find much for choices that i could actualy get for this winter. Thanks again and look forward to putting it in. Hopefuly have it instaled in a few weeks. Take care
http://www.ruralenergyproducts.com/furnaces-boilers.aspx
Just a link for ya if your deal falls threw
Just a link for ya if your deal falls threw
kinsmanstoves
Minister of Fire
- Status
Similar threads
