Question for Huskee 22 ton splitter owners

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

11 Bravo

New Member
Friend of mine who I cut / split with is purchasing this splitter. His only concern is with the concave main beam / cradle and whether or not alot of debris collects in the grooves and causes problems or jams.......Otherwise, from what I have read on the previous posts, folks are really happy with this splitter. Any owners of this model have an opinoin on that concern ? Thanks............Paul
 
11 Bravo said:
Friend of mine who I cut / split with is purchasing this splitter. His only concern is with the concave main beam / cradle and whether or not alot of debris collects in the grooves and causes problems or jams.......Otherwise, from what I have read on the previous posts, folks are really happy with this splitter. Any owners of this model have an opinoin on that concern ? Thanks............Paul

I've got one, bought it earlier this year. It's a great splitter. Dirt and bark does build up in the I-beam, you just have to remove it as you go. I imagine any splitter with this design has the same problem/situation. It doesn't hamper things though. I thought I read on here that someone mentioned using spray type vegetable oil to lubricate the I-beam. I haven't tried it myself and don't know if it's necessary. I don't recall reading it in the manual.
Snyde
 
snydley said:
11 Bravo said:
Friend of mine who I cut / split with is purchasing this splitter. His only concern is with the concave main beam / cradle and whether or not alot of debris collects in the grooves and causes problems or jams.......Otherwise, from what I have read on the previous posts, folks are really happy with this splitter. Any owners of this model have an opinoin on that concern ? Thanks............Paul

I've got one, bought it earlier this year. It's a great splitter. Dirt and bark does build up in the I-beam, you just have to remove it as you go. I imagine any splitter with this design has the same problem/situation. It doesn't hamper things though. I thought I read on here that someone mentioned using spray type vegetable oil to lubricate the I-beam. I haven't tried it myself and don't know if it's necessary. I don't recall reading it in the manual.
Snyde

I agree with having to clean the beam as you go. If the debris is wet it clumps more than dry. I bought one last year and put a cradle on it this year from ebay and works fine.

Shipper
 
If I split more than a cord in horizontal I have to clean it out with a mallet and screwdriver. It's not as much of a problem in vertical. It's never affected the ram but I find it rather annoying. Incidentally the Speeco brand splitters (not Huskee made by Speeco for TSC) have holes in the I-beam at the foot that address the problem.
 
Like others I clean mine after so many splits. I always though have a square split that I put on the end to act as a stop to completely split what ever round I am going through ( this is very important with stringy elm which I seem to have a lot of). This helps to not pack the bark debris in that channel.
 
Status
Not open for further replies.