Help troubleshooting auger motor on Enviro Windsor

I'm trying to troubleshoot a no pellet feed/no auger function on a 4 yr old Enviro Windsor. Using Ron's excellent instr. under the Info/Sticky section, here's where I'm at:
- Full cleaning of vents, stove, auger tube, etc;
- Vaccuum switch tests: cked wires, etc., cleaned hose, barb on exhaust vent, etc. BUT I couldn't tell if it was bad on its own. Ron can you clarify the continuity test steps for the vacuum switch? Should I do all of this with stove powered on?
- I detected no power to auger motor when stove turned on and auger light pulsing.
- When I bypassed vacuum switch, auger still didn't move when started up BUT I did detect power to auger motor contacts.

Does this mean that both my vacuum switch and auger motor are bad? What are my next steps? Am I missing something?

I'm getting close to calling my dealer, but their service is slow and expensive (compared to my installing a new auger motor and switch, if that's it). Can anyone in WMass recommend a reliable service tech for my stove? I've got my 3 ton stacked in my shed and want to get his baby fired up for some cool nights ahead. HELP!

Thanks for this great forum?

Thanks for those suggestions. I am going to try to retest the vacuum switch and pull the auger motor.

I'm no electrician so what's the safest way to test auger motor once removed without frying myself?

Always open to more advice. Thanks!