Installing Jotul insert yourself?

  • Active since 1995, Hearth.com is THE place on the internet for free information and advice about wood stoves, pellet stoves and other energy saving equipment.

    We strive to provide opinions, articles, discussions and history related to Hearth Products and in a more general sense, energy issues.

    We promote the EFFICIENT, RESPONSIBLE, CLEAN and SAFE use of all fuels, whether renewable or fossil.
Status
Not open for further replies.

MacKay

Member
Jan 21, 2008
62
SW. Pennsylvania
Is it a big deal to install a Jotul Rockland on your own? My local distributor doesn't have the unit in stock and installation is pricey. I can however buy one from a distributor about 40 miles away and save about $1500 total if I install it myself. Is it hard to install? Any reason I shouldn't? Tips / suggestions?
 
can you lift and move 500 lbs by yourself?
 
I have an existing masonry chimney. I measured three times to confirm I have the proper clearances and space. I included the pipe, cap and the block off plates in my price analysis.

Yes, I actually can lift and move a 500 lb. stove by myself. But I'll probably get someone to grab the other side of it to slide it in.
 
You've answered the questions correctly, so yes, go for it. It is not rocket science, after all. Installers are just more experienced and know how to deal with the "problems" that can arise. One other thing - the chimney top and roof - got that covered? Have the ladder and help to install and secure the liner? Other than that you should be good. Protect your hearth as best you can. Research everything on this site and you will see how others have done.

MarkG
 
DMM, if you are reasonably competent with hand tools and like taking your time to do a thorough safe job, then yes, you should be able to do this. Read up first. Make simple sketches and ask lots of questions. Review past threads about installations. And above all, take an evening or two to read the manual, all of it.

Sometimes the damper doesn't need to be removed, sometimes it does. A cut off grinder can be used at the pivots if needed. Start by measuring and letting us know what you've got for a chimney, flue pipe size, damper throat width, etc. Posting pictures always helps a lot. There are things that can be spotted in a picture that might not be mentioned.
 
DMM said:
I have an existing masonry chimney. I measured three times to confirm I have the proper clearances and space. I included the pipe, cap and the block off plates in my price analysis.

Yes, I actually can lift and move a 500 lb. stove by myself. But I'll probably get someone to grab the other side of it to slide it in.

Atta boy! I have moved my Avalon Olympic around by myself too. I do need another person for going up and down stairs though!! Sliding it around is doable but the last few times I rolled it in and out on 1" PVC cut at about 18". Makes life almost too easy.
 
Status
Not open for further replies.